Behringer EUROPOWER PMP960M Manual - Page 13

Specifications

Page 13 highlights

13 EUROPOWER PMP1680S/PMP980S/PMP960M User Manual 6. Specifications Microphone Inputs Type Mic E.I.N. (20 Hz - 20 kHz) @ 0 Ohm source resistance @ 50 Ohm source resistance @ 150 Ohm source resistance Frequency response Gain Max. input level Impedance Signal-to-noise ratio Noise (THD + N) XLR, electronically balanced input circuit -112 dB / 114 dB A-weighted -112 dB / 114 dB A-weighted -112 dB / 114 dB A-weighted < 10 Hz - 200 kHz (-1 dB) < 10 Hz - > 200 kHz (-3 dB) +30 dB, +10 dB with pad +12 dBu @ +10 dB gain approx. 2.2 kOhm balanced / approx. 1.1 kOhm unbalanced 110 dB / 114 dB A-weighted (0 dBu In @ +10 dB gain) 0.001% / 0.0007% A-weighted Mono Line Inputs Type Impedance Max. input level ¼" TS connectors, balanced approx. 20 kOhm, balanced +21 dBu Stereo Line Inputs PMP980S/PMP1680S Type Impedance Max. input level ¼" TRS connectors, unbalanced approx. 100 kOhm, unbalanced +21 dBu Equalizer Low Mid High 80 Hz / +/-15 dB 2.5 kHz / +/-15 dB 12 kHz / +/-15 dB CD/TAPE Input Type Impedance RCA approx. 10 kOhm Preamp Outputs MAIN Type Impedance Max. output level MONITOR Type Impedance Max. output level ¼" TS connectors, unbalanced approx. 150 Ohm, unbalanced +21 dBu ¼" TS connectors, unbalanced approx. 150 Ohm, unbalanced +21 dBu Stereo Outputs PMP960M Type Impedance Max. input level PMP980S/PMP1680S Type Impedance Max. input level Type Impedance Max. input level Main Mix System Data Noise: MAIN MIX @ -∞ Channel fader -∞ MAIN MIX @ 0 dB Channel fader -∞ MAIN MIX @ 0 dB Channel fader @ 0 dB Loudspeaker Outputs Type Load impedance: MAIN L/R MONITOR/MAIN MONO MAIN MONO/MAIN MONO BRIDGE DSP Converter Dynamics D/A Sampling rate Delay Time Signal run time (Line In > Line Out) Display PMP960M Type PMP980S/PMP1680S Type RCA, mono output approx. 1 kOhm +21 dBu ¼" TRS connectors, unbalanced approx. 150 Ohm, unbalanced +21 dBu RCA approx. 1 kOhm +21 dBu -102 dB/-106 dB A-weighted -88 dB/-91 dB A-weighted -84 dB/-86 dB A-weighted Neutrik Speakon-compatible connector 4 - 8 Ohm 4 - 8 Ohm 4 - 8 Ohm 8 - 16 Ohm 24-bit Delta-Sigma, 64/128-times oversampling 90 dB 40 kHz max. 5 secs approx. 1.5 ms 2-digit, 7-segment LED 2 x 2-digit, 7-segment LED

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

13
EUROPOWER PMP1680S/PMP980S/PMP960M User Manual
Specifications
6.
Microphone Inputs
Type
XLR, electronically balanced input circuit
Mic E.I.N. (20 Hz - 20 kHz)
@ 0 Ohm source resistance
-112 dB / 114 dB A-weighted
@ 50 Ohm source resistance
-112 dB / 114 dB A-weighted
@ 150 Ohm source resistance
-112 dB / 114 dB A-weighted
Frequency response
< 10 Hz - 200 kHz (-1 dB)
< 10 Hz - > 200 kHz (-3 dB)
Gain
+30 dB, +10 dB with pad
Max. input level
+12 dBu @ +10 dB gain
Impedance
approx. 2.2 kOhm balanced /
approx. 1.1 kOhm unbalanced
Signal-to-noise ratio
110 dB / 114 dB A-weighted
(0 dBu In @ +10 dB gain)
Noise (THD + N)
0.001% / 0.0007% A-weighted
Mono Line Inputs
Type
¼" TS connectors, balanced
Impedance
approx. 20 kOhm, balanced
Max. input level
+21 dBu
Stereo Line Inputs
PMP980S/PMP1680S
Type
¼" TRS connectors, unbalanced
Impedance
approx. 100 kOhm, unbalanced
Max. input level
+21 dBu
Equalizer
Low
80 Hz / +/-15 dB
Mid
2.5 kHz / +/-15 dB
High
12 kHz / +/-15 dB
CD/TAPE Input
Type
RCA
Impedance
approx. 10 kOhm
Preamp Outputs
MAIN
Type
¼" TS connectors, unbalanced
Impedance
approx. 150 Ohm, unbalanced
Max. output level
+21 dBu
MONITOR
Type
¼" TS connectors, unbalanced
Impedance
approx. 150 Ohm, unbalanced
Max. output level
+21 dBu
Stereo Outputs
PMP960M
Type
RCA, mono output
Impedance
approx. 1 kOhm
Max. input level
+21 dBu
PMP980S/PMP1680S
Type
¼" TRS connectors, unbalanced
Impedance
approx. 150 Ohm, unbalanced
Max. input level
+21 dBu
Type
RCA
Impedance
approx. 1 kOhm
Max. input level
+21 dBu
Main Mix System Data
Noise:
MAIN MIX @ -
-102 dB/-106 dB A-weighted
Channel fader -
MAIN MIX @ 0 dB
-88 dB/-91 dB A-weighted
Channel fader -∞
MAIN MIX @ 0 dB
-84 dB/-86 dB A-weighted
Channel fader @ 0 dB
Loudspeaker Outputs
Type
Neutrik Speakon-compatible connector
Load impedance:
MAIN L/R
4 - 8 Ohm
MONITOR/MAIN MONO
4 - 8 Ohm
MAIN MONO/MAIN MONO
4 - 8 Ohm
BRIDGE
8 - 16 Ohm
DSP
Converter
24-bit Delta-Sigma,
64/128-times oversampling
Dynamics D/A
90 dB
Sampling rate
40 kHz
Delay Time
max. 5 secs
Signal run time
approx. 1.5 ms
(Line In > Line Out)
Display
PMP960M
Type
2-digit, 7-segment LED
PMP980S/PMP1680S
Type
2 x 2-digit, 7-segment LED