Behringer EUROPOWER PMP960M Brochure - Page 5

EUROPOWER PMP980S PMP960M Page 5 of 7 OUTPUT A & B connect to passive PA speakers FX IN switch activates FX processor HIGH EQ MID EQ LOW EQ MON adjusts signal level to monitors FX 1 controls level of signal to FX 1 FX 2 controls level of signal to FX 2 (PMP980S only) PAN adjusts channel signal in stereo image (PMP980S only) Channel signal LEVEL control CLIP LED PAD switch reduces input sensitivity by 20 dB ¼" bal/ unbal input 8/6 MONO channels, bal XLR IN PROGRAM dial selects FX presets FX adjust effects return level in main signal FX adjusts effects return level in monitor 7-band graphic EQ FBQ switch CD/TAPE IN adjusts CD/ TAPE signal in monitor /main 4-segment MONITOR LEVEL meter PHANTOM POWER switch for using condenser mics MONITOR MASTER dial controls monitor signal volume POWER AMP switch toggles between STEREO, MONO and BRIDGED mode 4-segment MAIN LEVEL meter SPEAKER PROCESSING switch activates filter, adapting mixer to loudspeakers MAIN MASTER dial control main signal volume STANDBY switch mutes all input channels, except CD/TAPE IN VOICE CANCELER switch eliminates vocals from CD/ TAPE IN signal MAIN ¼" jacks send signal to external amplifiers, active loudspeakers, etc. Left and right bal/unbal line level ¼" TRS inputs for stereo channels (PMP980S only) FX OUT 1&2 ¼" jacks connect to outboard equipment (PMP960M has a single FX OUT) FOOTSW(itch) AUX IN ¼" inputs input route external stereo signal to main mix (PMP960M has only one AUX IN) AUX IN dial adjusts external signal level in main mix RCA CD/ TAPE IN and REC OUT jacks 1/4" MONITOR output connects to power amplifiers, active monitor speakers, IEM systems, etc.