Behringer EUROPOWER PMP960M Brochure - Page 6

Page 6 of 7 EUROPOWER PMP980S PMP960M PMP980S MICROPHONE INPUTS Type Mic E.I.N. (20 Hz - 20 kHz) @ 0 Ohm source resistance @ 50 Ohm source resistance @ 150 Ohm source resistance Frequency response Gain Max. input level Impedance Signal-to-noise ratio Noise (THD + N) XLR, electronically balanced input circuit - -112 dB / 114 dB A-weighted -112 dB / 114 dB A-weighted -112 dB / 114 dB A-weighted < 10 Hz - 200 kHz (-1 dB) < 10 Hz - > 200 kHz (-3 dB) +12 dBu @ +10 dB gain +12 dBu @ +10 dB gain approx. 2.2 kΩ balanced / 1.1 kΩ unbalanced 110 dB / 114 dB A-weighted (0 dBu In @ +10 dB gain) 0.001% / 0.0007% A-weighted MONO LINE INPUTS Type Impedance Max. input level ¼" TS connectors, balanced approx. 20 kΩ, balanced +21 dBu STEREO LINE INPUTS Type Impedance Max. input level ¼" TRS connectors, unbalanced approx. 100 kΩ, unbalanced +21 dBu EQUALIZER Low Mid High 80 Hz / ±15 dB 2.5 kHz / ±15 dB 12 kHz / ±15 dB 2 TRACK INPUT Type Impedance RCA approx. 10 kΩ PREAMP OUTPUTS MAIN Type Impedance Max. output level ¼" TS connectors, unbalanced approx. 150 Ω, unbalanced +21 dBu MONITOR Type Impedance Max. output level ¼" TS connectors, unbalanced approx. 150 Ω, unbalanced +21 dBu STEREO OUTPUTS Type Impedance Max. input level Type Impedance Max. input level ¼" TRS connectors, unbalanced approx. 150 Ω, unbalanced +21 dBu RCA approx. 1 kΩ +21 dBu MAIN MIX SYSTEM DATA Noise: MAIN MIX @ -∞ Channel fader -∞ MAIN MIX @ 0 dB Channel fader -∞ MAIN MIX @ 0 dB Channel fader @ 0 dB -102 dB / -106 dB A-weighted -102 dB / -106 dB A-weighted -88 dB / -91 dB A-weighted -88 dB / -91 dB A-weighted -84 dB / -86 dB A-weighted -84 dB / -86 dB A-weighted LOUDSPEAKER OUTPUTS Type Professional speaker connector Load impedance: MAIN L/R MONITOR/MAIN MONO MAIN MONO/MAIN MONO BRIDGE 4 - 8 Ohm 4 - 8 Ohm 4 - 8 Ohm 8 - 16 Ohm DSP Converter Dynamics D/A Sampling rate Delay Time Signal run time (Line In > Line Out) 24-bit Delta-Sigma, 64/128-times oversampling 90 dB 40 kHz max. 5 secs approx. 1.5 ms DISPLAY Type 2 x 2-digit, 7-segment LED OUTPUT POWER RMS @ 1% THD, both channels driven: 8 Ohm per channel 160 W 4 Ohm per channel 300 W RMS @ 1% THD, bridged mode: 8 Ohm 600 W Peak Power, both channels driven: 8 Ohm per channel 260 W 4 Ohm per channel 450 W Peak Power, bridged mode: 8 Ohm 900 W POWER SUPPLY Power Consumption Fuse 100 - 120 V~, 50/60 Hz Fuse 220 - 240 V~, 50/60 Hz Mains connector max. 1000 W T 10 A H 250 V T 6.3 A H 250 V IEC standard receptacle DIMENSIONS/WEIGHT Dimensions (H x W x D) Weight 12.4 x 18.1 x 8.7" 315 x 460 x 220 mm 20.75 lbs / 9.4 kg PMP960M MICROPHONE INPUTS Type Mic E.I.N. (20 Hz - 20 kHz) @ 0 Ohm source resistance @ 50 Ohm source resistance @ 150 Ohm source resistance Frequency response Gain Max. input level Impedance Signal-to-noise ratio Noise (THD + N) XLR, electronically balanced input circuit - -112 dB / 114 dB A-weighted -112 dB / 114 dB A-weighted -112 dB / 114 dB A-weighted < 10 Hz - 200 kHz (-1 dB) < 10 Hz - > 200 kHz (-3 dB) +12 dBu @ +10 dB gain +12 dBu @ +10 dB gain approx. 2.2 kΩ balanced / 1.1 kΩ unbalanced 110 dB / 114 dB A-weighted (0 dBu In @ +10 dB gain) 0.001% / 0.0007% A-weighted MONO LINE INPUTS Type Impedance Max. input level ¼" TS connectors, balanced approx. 20 kΩ, balanced +21 dBu STEREO LINE INPUTS Type - Impedance - Max. input level - EQUALIZER Low Mid High 80 Hz / ±15 dB 2.5 kHz / ±15 dB 12 kHz / ±15 dB 2 TRACK INPUT Type Impedance RCA approx. 10 kΩ PREAMP OUTPUTS MAIN Type Impedance Max. output level ¼" TS connectors, unbalanced approx. 150 Ω, unbalanced +21 dBu MONITOR Type Impedance Max. output level ¼" TS connectors, unbalanced approx. 150 Ω, unbalanced +21 dBu STEREO OUTPUTS Type Impedance Max. input level Type Impedance Max. input level - - - RCA, mono output approx. 1 kΩ +21 dBu