Behringer LED DERBY DSL1 Quick Start Guide - Page 15

28 LED DERBY DSL1 Display (1) (2) (3) (4) (5) (6) (7) (8) Item Button: LED: No. Silkscreen Function 1 MENU Activates main menu and toggles between menu items. Closes an open submenu without saving 2 DOWN Decreases the displayed value by one/ Navigate function 3 UP Increases the displayed value by one/ Navigate function 4 ENTER Enter selected function/ Confirm and save 5 DMX Flashes when in DMX mode 6 MASTER Flashes when in MASTER Mode 7 SLAVE Flashes when in SLAVE Mode 8 SOUND Flashes when in Sound Active Mode Display Functions Press the MENU button to access menu options, keep pressing MENU to toggle menu items. Press the ENTER button to access desired functions and the display will flash, then use the UP/DOWN buttons to navigate and select the desire setting. Press ENTER to save and confirm, or press MENU to go back without saving. The main functions are as follows: Quick Start Guide 29 Menu Options and Settings Description Addr A001-512 UP/Down to select from address 1 to 512 ChAn 2Ch/6Ch DMX Channel selection 2/ 6 Channel mode MASL MASt Activate MASTER (HOST) mode option SLAv Activate SLAVE mode: when connected to DMX input, slave unit will replicate the master (HOST) unit Auto AutM-AutS AutM Activate Auto mode for derby and stobe automatic show Autd Activate Auto mode for derby automatic show AutS Activate Auto mode for strobe automatic show SPEd SP01-99 Select SP01 Min speed, SP99 Max speed Stro St- St01-20 Activate strobe show mode. Select from 20 preset shows ST01-20 Sped SP01-99 Show speed select SP01 Min speed, SP99 Max speed dErb dIM d000-100 Derby manual mode select dimmer brightness from 0 = off, 100 = max r r000-r255 Derby manual mode select Red LED brightness from 0 = off, 255 = max G G000-G255 Derby manual mode select Green LED brightness from 0 = off, 255 = max b b000-b255 Derby manual mode select Blue LED brightness from 0 = off, 255 = max U U000-U255 Derby manual mode select White LED brightness from 0 = off, 255 = max Stro FS00-99 Derby manual mode select strobe frequency from FS00 = off, FS99= max strobe speed rot rt00-rt99 Derby manual mode select light rotation speed rt00 = off, rt99=max speed SoUn on Turn SOUND CONTROL ON. The AUTO and Show mode will follow the rhythm of the music oFF Turn SOUND CONTROL mode OFF Sens S001-100 Select sound sensitivity of SOUND mode from low to 100 high bLnD no when DMX signal is interrupted, it will go back to last selected mode YES when DMX signal is interrupted, it will black out Led on The led display is always ON oFF The led display will turn off after 5-10 seconds. Touch any key to turn it back ON Disp dISP The led display in forward direction dSIP The led display rotate 180 degree tESt tESt Press ENTER to start test mode, light will perform routine test FhrS Press enter to show fixture run time vEr Press enter to show software version rSt no Default YES Restart fixture