Behringer NOX404 Brochure - Page 13

Page 13 of 20 NOX1010/NOX606 NOX404/NOX303 NOX202 NOX1010 Top Panel GAIN knob controls channel input sensitivity CUE button allows source monitoring without inclusion in master output CHANNEL EQ knobs boost/ cut high, mid and low frequencies INPUT SELECT switch selects channel audio source CHANNEL VU METER displays input source signal level FX CUE button sends effect to cue section for preview INTENSITY fader adjusts effect's mix or resonance parameter TAP button allows effect's tempo parameter to be entered manually BOOTH knob adjusts RCA BOOTH OUTPUTS level MASTER/CUE button toggles MASTER VU METER between master output or cue signal SPLIT/BLEND (CUE) button allows combining cue and program sources or splitting into left (cue) and right (main) MIC ON button CF ASSIGN knobs selects source on each side of crossfader XFADE CURVE knob adjusts fade steepness between source A and B CUE GAIN knob adjusts cue volume FX DISPLAY indicates selected effect FX SELECT knob scrolls through available effects, pressing knob confirms selection FREQUENCY knob adjusts FX ON button effect's activates frequency or digital effects time-based processor parameter FX ASSIGN knob selects which sources are affected by effect BALANCE knob adjusts left to right balance of RCA MAIN and BALANCED OUTPUTS MIC GAIN knob acts as volume control MIC EQ knobs adjust channel equalization TALKOVER automatically lowers music volume when mic is used, up position engages talkover function, down activates mic without lowering music FADER START switch engages fader start function, allowing mixer to send start/cue signals to auto-start CD player CROSSFADER fades between sources assigned to either side CUE MIX knob allows gradual blend between cue and program signal MASTER knob controls RCA MAIN and BALANCED OUTPUT level MASTER VU METER displays master output and/or cue signal level STEREO/MONO button toggles master output between stereo and mono mode