Behringer WING-DANTE Quick Start Guide - Page 19

19 WING-DANTE Quick Start Guide Card set to Master In this example, 'Preferred Master' is selected, but 'Slave to External Word Clock' remains unchecked. WING internal clock set to Master Dante Virtual Soundcard The Dante Virtual Soundcard is a software application that turns your PC or Mac into a Dante-enabled device, allowing Dante audio traffic to be transmitted and received using the standard Ethernet port. No additional hardware is required. On Windows, the Dante Virtual Soundcard uses Steinberg's ASIO audio interface, and can be used with any audio application that supports ASIO or WDM. On Mac OSX, the Dante Virtual Soundcard uses the standard Core Audio interface, and can be used by almost any standard audio application. Visit audinate.com for further advice on downloading and licensing these applications. In this example, both 'Preferred Master' and 'Slave to External Word Clock' are checked. Note that in either clock setup, the WING-DANTE card might be displayed in the Dante Controller app as the specific chip name (ex: BKLYN-II-06f732). A new name can be assigned in the controller's Device View window. 7. Audinate Software Tools Dante Controller The Dante Controller is a software application provided by Audinate which allows users to configure and route audio around Dante networks. It is available for PCs running Windows and Apple Macs running OSX 10.5. Dante Controller must be installed on one or more PC/Mac computers on the Dante network in order to change any signal routing or clocking in the network. Dante Controller is not required, when everything is pre-configured, for running audio between Dante devices over the network.