Belkin F5D7011 User Manual - Page 19

section Using the Belkin Wireless LAN Utility 128-Bit Encryption 1 As a result of 64-bit WEP's potential security weaknesses, a more secure method of 128-bit encryption was developed. 128-bit encryption includes a key length of 104 bits plus 24 additional bits of 2 system-generated data (128 bits total). Some hardware manufacturers refer to 128-bit as 104-bit encryption. 3 Most of the new wireless equipment in the market today supports both 64-bit WEP and 128-bit WEP encryption, but you might have older equipment that only supports 64-bit WEP. All Belkin wireless 4 products will support both 64-bit WEP and 128-bit encryption. 5 Encryption Keys After selecting either the 64-bit WEP or 128-bit encryption mode, it is 6 critical that you generate an encryption key. If the encryption key is not consistent throughout the entire wireless network, your wireless networking devices will be unable to communicate with one another. 7 You can enter your key by typing in the hex key. A hex (hexadecimal) key is a mixture of numbers and letters from A-F and 0-9. For 64-bit WEP, you need to enter 10 hex keys. For 128-bit WEP, you need to 8 enter 26 hex keys. 9 For instance: AF 0F 4B C3 D4 = 64-bit WEP key 10 C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit key Write down the hex WEP key from your wireless router or access point and enter it manually into the hex WEP key table in your Card's configuration screen. 17