Beltronics Vector 960 Owner's Manual - Page 14

k Feature 1 - AutoMute On or Off With "Am u t e o n ", your unit will provide several X, K or Super Wideband Ka audio alerts followed by the Digital Voice announcement of the signal detected. After the Digital Voice announcement, a "clicking" tone keeps you quietly informed for as long as the signal is present. This clicking becomes more rapid as the strength of the Radar signal increases. "Am u t e o n " enables you to conveniently monitor extended encounters without having to manually mute or adjust the volume setting. With "Am u t e o f f ", your unit will provide a continuous series of X, K, Super Wideband Ka audio alerts and Digital Voice announcements of the signal detected. Digital Voice prompts are provided once after the initial audio alert. This standard setting is often preferred when background noise in a vehicle is loud. Factory setting is "Am u t e o f f ". Note: because of its urgency, Laser alerts are not affected by this mode. k Feature 2 - Radar/Laser Digital Voice Prompts With "Vo i c e o n ", unit will provide Digital Voice prompts followed by "beeps" when X/K/Ka and Laser signals are detected. With "Vo i c e o f f ", unit will sound unique audio tones only. Factory setting is "Vo i c e o n ". Note: For Model V940, the Digital Voice Feature of the five SWS™ categories is included with the Radar/Laser Voice Feature. k Feature 3 - Safety Warning System® (SWS™) With "SWSo n ", unit will provide a message when signals from SWS™ transmitters are detected. Factory setting is "SWSo n ". 12