Beltronics Vector 960 Owner's Manual - Page 18
Visor Mounting, Fuse Replacement
View all Beltronics Vector 960 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
5. To adjust the angle of the bracket, squeeze and hold the circular "buttons" on the sides of the bracket; this will allow you to angle the bracket to your windshield. Note-some vehicles have a plastic coating on the inside of the windshield designed to protect occupants in case of an accident. Use of the windshield bracket on this type of windshield can permanently mark the surface. Check with your dealer if you are unsure whether your vehicle is equipped with this type of windshield. k Visor Mounting 1. Remove the two suction cups and follow steps 1, 2, 4 and 5. 2. Clip the detector to the edge of the sun visor nearest the windshield. k Fuse Replacement If the fuse has blown, remove the tip from the lighter plug followed by the old fuse. Replace the fuse with a 1-amp, 3AG fuse. Defeating the fuse protection can damage your unit or your vehicle's electrical system and will void your warranty. Note-the tip is in two pieces; be careful not to lose either piece or the spring inside the holder. (See diagram below). 16