Beltronics Vector 960 Owner's Manual - Page 9

Whichever Operating mode you select, VECTOR 960 and VECTOR 940 will be in standby mode and ready to detect traffic Radar, Laser and SWS™ signals. The display will show "Au t o Sc a n ™" (factory pre-set which is suitable for ALL driving conditions, unless you change this to "Hi g h w a y ", "Cit y X", or "Cit y ALL" (see page 9). kTUTORIAL MODE The Tutorial Mode allows you to become more familiar with all audible and visual alerts. The message "TUTORIAL" appears in the display followed by the audio and corresponding Text Message for "LASER", "Ka AUDIO", "K AUDIO", "X AUDIO", sample Radar alert and "SAFETY WARNING SYSTEM SAMPLE ALERTS". Three sample SWS™ messages are then presented in the display along with the corresponding Digital Voice Messages: Note: sample radar and SWS™ messages are random. Presentation of alerts will differ than what is printed based on operation mode selected. Tutorial Mode will cycle continuously until PWR is pressed to exit this mode. Sample 1 "ACCIDENT AHEAD" Sample 2 "HIGHWAY WORKCREW AHEAD" Sample 3 "POLICE IN PURSUIT" You can access the complete list of SWS™ messages by pressing the AUD button. "MSG 1" will appear in the display once AUD is pressed. Pressing the AUD button a second time will allow you to listen to the SWS™ message while viewing it in the display. (to move forward in the list, press the CTY button; to move backward in the list, press the DRK button). Continue the steps above to play all 60 SWS™ messages. Note: VECTOR 940 provides Digital Voice and Text Messages for the FIVE SWS™ categories only and NOT the individual messages for each category. For example, "MSG 1" will play the category, Highway Construction/Maintenance. This 7 heading will play for all 11 messages. Refer to the enclosed card for the other category messages.