BenQ BenQ MP776 DLP 3D Projector User Manual - Page 48

2. PICTURE menu Function (Default setting/value) Picture Mode (Presentation) Reference Mode (Dynamic) Brightness (50) Description Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting a picture mode" on page 32 for details. Selects a picture mode that best suits your need for the image quality and further fine-tune the image based on the selections listed on the same page below. See "Setting the User 1/User 2 mode" on page 32 for details. Adjusts the brightness of the image. See "Adjusting Brightness" on page 33 for details. Contrast (0) Adjusts the degree of difference between dark and light in the image. See "Adjusting Contrast" on page 33 for details. Color (0) Tint (0) Sharpness (15) Brilliant Color (On) Adjusts the color saturation level -- the amount of each color in a video image. See "Adjusting Color" on page 33 for details. This function is only available when a VIDEO or S-VIDEO signal is selected and the system format is NTSC or PAL. Adjusts the red and green color tones of the image. See "Adjusting Tint" on page 33 for details. This function is only available when a VIDEO or S-VIDEO signal is selected and the system format is NTSC. Adjusts the image to make it look sharper or softer. See "Adjusting Sharpness" on page 33 for details. This function is only available when a VIDEO or S-VIDEO signal is selected and the system format is NTSC or PAL. See "Adjusting Brilliant Color" on page 34 for details. Color Temperature (depends on the selected input signal) There are four color temperature settings available. See "Selecting a color temperature" on page 34 for details. 3D Color Management See "3D Color Management" on page 34 for details. Save Settings Saves the settings made for User 1 or User 2 mode. 48 Operation