BenQ BenQ MP776 DLP 3D Projector User Manual - Page 50

Function (default setting / value) Description Quick Cooling (On) Enables or disables the Quick Cooling function. Selecting On enables the function and projector cooling time will be shortened from a normal 90-second duration to approximately 30 seconds. High Altitude Mode (Off) A mode for operation in high altitude areas. See "Operating in a high altitude environment" on page 39 for details. 5. SYSTEM SETUP: Advanced menu Audio Settings Standby Monitor Out (Off) Mute (Off) Volume (5) Power on/off ring tone (On) See "Adjusting the sound" on page 39 for details. Selecting On enables the function. The projector can output a VGA signal when it is in standby mode and the COMPUTER 1 jack is correctly connected to devices. See "Connecting a monitor" on page 19 for how to make the connection. Enabling this function slightly increases the standby power consumption. Lamp Mode (Normal) See "Setting Lamp Mode as Economic" on page 54 for details. Lamp Settings Security Settings Baud Rate (115200) Test Pattern (Off) Reset lamp timer See "Resetting the lamp timer" on page 58 for details. Equivalent Lamp Hour See "Getting to know the lamp hour" on page 54 for details on how the total lamp hour is calculated. Change Password You will be asked to enter the current password before changing to a new one. See "Utilizing the password function" on page 26 for details. Power On Lock (Off) See "Utilizing the password function" on page 26 for details. Selects a baud rate that is identical with your computer's so that you can connect the projector using a suitable RS-232 cable and update or download the projector's firmware. This function is intended for qualified service personnel. Selecting On enables the function and the projector displays the grid test pattern. It helps you adjust the image size and focus and check that the projected image is free from distortion. 50 Operation