BenQ MS513 DLP Projector MS513, MX514, MW516 User Manual - Page 52
Picture Mode, Reference, Brightness, Contrast, Color, Sharpness, PICTURE menu
View all BenQ MS513 DLP Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
2. PICTURE menu FUNCTION DESCRIPTION Picture Mode Reference Mode Brightness Pre-defined picture modes are provided so you can optimize your projector image set-up to suit your program type. See "Selecting a picture mode" on page 36 for details. Selects a picture mode that best suits your need for the image quality and further fine-tune the image based on the selections listed on the same page below. See "Setting the User 1/User 2 mode" on page 36 for details. This function is only available when User 1/2 is selected. Adjusts the brightness of the image. See "Adjusting Brightness" on page 37 for details. This function is only available when User 1/2 is selected. Contrast Adjusts the degree of difference between dark and light in the image. See"Adjusting Contrast" on page 37 for details. This function is only available when User 1/2 is selected. Color Adjusts the color saturation level -- the amount of each color in a video image. See "Adjusting Color" on page 37 for details. This function is only available when User 1/2 is selected. This function is only available when a Video or S-Video signal is selected and the system format is NTSC or PAL. Adjusts the red and green color tones of the image. See "Adjusting Tint" on page 37 for details. Tint This function is only available when User 1/2 is selected. Sharpness This function is only available when a Video or SVideo signal is selected and the system format is NTSC or PAL.. Adjusts the image to make it look sharper or softer. See "Adjusting Sharpness" on page 37 for details. This function is only available when User 1/2 is selected. This function is only available when a Video or S-Video signal is selected and the system format is NTSC or PAL. 52 Operation