BenQ PV270 User Manual - Page 13
Connect the PC video cable, To Connect the DVI-DL Cable
View all BenQ PV270 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Tighten the thumbscrew on the bottom of the monitor base as illustrated. Orient and align the stand arm with the monitor ( ), push them together until they click and lock into place ( ). Gently attempt to pull them back apart to check that they have properly engaged. Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface. You should position the monitor and angle the screen to minimize unwanted reflections from other light sources. 1 2 1 2 2. Connect the PC video cable To Connect the DVI-DL Cable Connect the plug of the DVI-DL cable (at the end without the ferrite filter) to the monitor video socket. Connect the other end of the cable (at the end with the ferrite filter) to the computer video socket. Tighten all finger screws to prevent the plugs from accidently falling out during use. Either How to assemble your monitor hardware 13