Bernina 2500DCET Manual

Bernina 2500DCET Manual

Get Bernina 2500DCET PDF manuals and user guides View all Bernina 2500DCET manuals
Add to My Manuals
Save this manual to your list of manuals

Bernina 2500DCET manual content summary:

  • Bernina 2500DCET | Manual - Page 1
    Overlocker / Serger Instruction Manual Umschlag_GB.indd 1 2500DCET 10.10.2007 16:18:59 Uhr
  • Bernina 2500DCET | Manual - Page 2
    away from all moving parts. Special care is required around the sewing needle and knife. 6. Always use the proper needle plate. The wrong plate can cause the needle to break. SAVE THESE INSTRUCTIONS! This overlock/cover stitch machine is intended for household use only. 7. Do not use bent needles
  • Bernina 2500DCET | Manual - Page 3
    and handling of your new machine. We also provide you with tips and suggestions for using Dear Customer the various overlock stitches, roll hem, cover and chain stitch. On the last page of the manual, you will find a list of optional accessories and BERNINA services which provide even more scope
  • Bernina 2500DCET | Manual - Page 4
    from cover/chain stitch to overlock 60 Overlock practical sewing, needles and threads 61 Cover stitch/ top & bottom cover stitch practical sewing 67 Chain stitch practical sewing 70 Maintenance 71 Trouble shooting 72 Index 74 Technical information 76 Optional Accessories 77 Bernina publications
  • Bernina 2500DCET | Manual - Page 5
    with tape guide 6 Cover stitch extension plate 7 Needle clamp 2 8 Sewing light 9 Needle stop 1 10 Safety control light 11 Carrying handle 12 Thread guide 13 Thread guide support 14 Support rod 15 Differential feed dial 16 Stitch length dial 17 Handwheel 18 Foot control socket 19 Machine socket 20
  • Bernina 2500DCET | Manual - Page 6
    machine BERNINA 2500DCET overlock mode View from the front 7 12 1 Stitch selection dial 13 2 Stitch display 3 Cloth plate/free arm 14 4 Stitch plate 25 24 23 22 5 Standard presser foot with tape guide 6 Knife guard 11 7 Needle clamp 2 8 Sewing light 9 Needle stop 1 10 Safety control
  • Bernina 2500DCET | Manual - Page 7
    8 Details of the machine BERNINA 2500DCET overlock mode 8 View from the back 38 Thread stand 39 Foam pad 40 Spool stabilizers 41 Spool pin 42 First thread guide 43 Presser foot pressure control 44 Presser foot lifter 45 Light switch 46 Thread cutter 47 Foot control 48 Power cord 42
  • Bernina 2500DCET | Manual - Page 8
    knife 2 6 Lower knife setscrew 7 Upper knife 3 8 Conversion arm 5 6 4 Details of the machine 9 8 Accessories in looper cover The most important threading and machine accessories are neatly stored in the looper cover and always to hand. 1 Household needles 130/705H (2 x 70, 3 x 80) 2 Small
  • Bernina 2500DCET | Manual - Page 9
    foot with tape guide 15 Knife guard 7 9 10 8 11 14 15 * Cover stitch presser foot Instructions for using the cover stitch presser foot (compensating foot) are on page 16. 13 Cover stitch: Depending on whether your machine is delivered in overlock or cover stitch mode, either of the accessories
  • Bernina 2500DCET | Manual - Page 10
    BERNINA 2500DCET use only the foot control model YC-425 (USA, Canada). Sewing speed Decrease or increase the pressure on the electronic foot control for fully variable speed control. The maximum sewing speed for: Overlock stitch mode A to E Cover/chain stitch mode F and G Top&botom cover stitch
  • Bernina 2500DCET | Manual - Page 11
    up the machine 12 Waste collector Hang the waste collector onto the opening provided on the looper cover. It catches the cut-off fabric as you sew, keeping your working area neat and tidy. Thread, cones, spools Cones or domestic spools in all sizes can be used on your BERNINA overlocker. Place the
  • Bernina 2500DCET | Manual - Page 12
    2500_DCE_1_englisch_neu 09.10.2007 14:33 Uhr Seite 13 Setting up the machine Placing the spool holder for the top & bottom cover stitch thread Lift the foam pad (A), slide the guide tabs (C) of the spool holder (B) into the guide of the upperside of the spool holder from left to right into
  • Bernina 2500DCET | Manual - Page 13
    button (3). The Needle stop for cover and chain stitch (positions F/G/H) is generally down, i.e. cover and chain stitch formations end with the needle in the fabric. Safety control lamp: The machine will not sew if it has not been prepared correctly. When the foot control is depressed, the safety
  • Bernina 2500DCET | Manual - Page 14
    (2). Press the lifter down to lower the presser foot. Note: When the presser foot is raised, all the tensions are released making it easier to thread the machine. WARNING: If sewing in top & bottom cover stitch mode, when lifting the presser foot to its highest position (2), do not use any force.
  • Bernina 2500DCET | Manual - Page 15
    (2) guide the fabric and prevent sideways movement. Perfect for topstitching hems with elastic, folded edges, seams and ribbings as well as bindings or sewing on lace or elastic. Note: Cover stitch compensating foot: To prevent damaging the needle points, the cover stitch foot (accessory) should
  • Bernina 2500DCET | Manual - Page 16
    lower knife. The stitch width of overlock stitches is determined by the cutting width and the needle(s) in use. Note cover/chain stitch: Cover and chain stitches are sewn without knives. The upper knife and upper knife arm are fully raised when the machine is in cover/chain stitch mode. Position of
  • Bernina 2500DCET | Manual - Page 17
    instructions feed Your BERNINA overlocker is equipped with a front (1) and a rear (2) feed dog. The two feed dogs move independently, and the distance each feed dog travels can be adjusted independently. Gathering effect This is the most common use sewing. Test sew.
  • Bernina 2500DCET | Manual - Page 18
    and general operating instructions Setting Effect Overlock 2 Gathering effect, thread cover stitch (5 thread top & bottom cover stitch) Thick or loose knits, hand-knits Fine to medium weight knits Knits with the grain Sewing over seams 3 thread cover stitch (5 thread top & bottom cover stitch
  • Bernina 2500DCET | Manual - Page 19
    and general operating instructions 20 Presser foot pressure The presser foot pressure ensures perfect foot pressure is too high. Always set to «N» when sewing knits. 1 2 Upper knife Raise the needle(s) to their highest position (needle stop). Open the looper cover, if sewing in overlock
  • Bernina 2500DCET | Manual - Page 20
    top & bottom cover stitch Needle R Chain stitch Note: Remove all needle(s) not in use, and their corresponding thread(s). Inserting needles Needles can be inserted quickly and easily with the practical needle inserter. To remove: · Raise the needles (Needle stop). · Raise the presser foot and swing
  • Bernina 2500DCET | Manual - Page 21
    22 Functions and general operating instructions Upper looper converter 22 2 Attach the upper looper converter for overlock stitches sewn with one looper, e.g. 2 thread roll hem or 2 thread flatlock. · Lower the needles (press Needle stop) · Open the looper cover Attach the converter (stored in
  • Bernina 2500DCET | Manual - Page 22
    Uhr Seite 23 Needles, thread, fabric Needles and machine Your BERNINA overlocker is the BERNINA 2500DCET cover stitch or JLx2 needles 23 equipped with needle system when sewing cover and chain for cover and chain stitch 130/705 H (household need- stitch (Positions F and G). when replacement
  • Bernina 2500DCET | Manual - Page 23
    can be sewn with one looper using the upper looper converter. Examples: A 3 thread super stretch 2 thread overlock/flatlock/roll hem B C D E 10 11 12 13 14 15 16 The BERNINA 2500DCET can be converted to cover and chain stitch. The cover stitch is 2.5/5 mm wide and is sewn with two or three
  • Bernina 2500DCET | Manual - Page 24
    pre-set tensions for woolly nylon or a similar decorative 25 thread in the loopers. Position F is pre-set for cover stitch, G for chain stitch using all-purpose overlock thread and H for top & bottom cover stitch. Stitch display The stitch display provides all the information you need about
  • Bernina 2500DCET | Manual - Page 25
    Uhr Seite 26 Stitch Chart No. Stitch 1 4 thread overlock with integrated safety seam Symbols 2 3 thread super stretch 26 3 3 thread overlock 4 2 thread wrapped overlock 5 3 thread narrow seam 6 2 thread roll hem 7 3 thread roll hem 8 3 thread flatlock 9 2 thread flatlock Stitch width Pos
  • Bernina 2500DCET | Manual - Page 26
    seams in woven or fleecy fabrics or firm knits. Neatening and sewing seams in clothing and home dec articles. Seams in T-shirts, thread in the loopers. Position F is pre-set for cover stitch, G for chain stitch using all-purpose overlock thread and H for top & bottom cover stitch. The machine
  • Bernina 2500DCET | Manual - Page 27
    3 thread narrow cover stitch 13 Chain stitch Symbols 14 5 thread top & bottom cover stitch 15 4 thread top & bottom cover stitch 16 4 thread narrow top & bottom cover stitch Stitch Pos. Thread Basic settings 5 mm needles R, C and L F Lower looper: all-purpose overlock thread, Stitch length
  • Bernina 2500DCET | Manual - Page 28
    for overlock stitches using standard overlock thread. The stitches on Position B are the same as position A but with pre-set tensions for woolly nylon or a similar decorative thread in the loopers. Position F is pre-set for cover stitch, G for chain stitch using all-purpose overlock thread and
  • Bernina 2500DCET | Manual - Page 29
    , use coloured threads 2. Needle R (brown markings) to match the threading codes, i.e. blue, red, green and yellow for 4-thread overlock, so that when you test Your BERNINA overlocker is equipped with practical 30 sew, you can see exactly how the stitch is formed. threading aids: Cover stitch
  • Bernina 2500DCET | Manual - Page 30
    back to the front into the guide. 2. Thread the first machine guide. 3. Slip the thread through the groove. 4., 5., 6., 7. Thread the guides. 8. Thread the looper eye and lay the thread to the left under the presser foot. Note: Do not thread the upper looper when using the upper looper converter.
  • Bernina 2500DCET | Manual - Page 31
    Uhr Seite 32 Overlock threading Lower looper (red markings) 2 Place the spool on the spool 1 pin as illustrated. 32 10 9 6 7 8 2 3 4 5 1. Bring the thread up from the spool and lay it from the back to the front into the guide. 2. Thread the first machine guide. 3. Slip the thread through the
  • Bernina 2500DCET | Manual - Page 32
    8 8 Overlock threading Place the spool on the spool pin as illustrated. 33 1. Bring the thread up from the spool and lay it from the back to the front into the guide. 2. Thread the first machine guide. 3. Slip the thread through the groove. 4., 5., 6. Take the thread under the thread guide plate
  • Bernina 2500DCET | Manual - Page 33
    at the needles. Raise the presser foot, pull the threads through and re-thread the needles. Pull the looper threads through using the existing thread chain. Some thick decorative threads cannot be pulled through the looper eyes. Lower the presser foot. Select the stitch of your choice and test sew.
  • Bernina 2500DCET | Manual - Page 34
    2500_DCE_1_englisch_neu 09.10.2007 14:35 Uhr Seite 35 Overlock sewing test and fine tuning After threading select the stitch of your choice (stitch selection dial) and test sew. Seam begin, seam end, thread cutter Raise the tip of the presser foot with your thumb and position the fabric just
  • Bernina 2500DCET | Manual - Page 35
    35 Uhr Seite 36 Overlock sewing test and fine tuning 2 1 36 Deco guide The deco guide (in the accessory bag) is specially designed for sewing wide seams and edges with decorative threads (see section Threads /Decorative thread page 23). Position the guide over the top of the machine over one of
  • Bernina 2500DCET | Manual - Page 36
    2500_DCE_1_englisch_neu 09.10.2007 14:35 Uhr Seite 37 Overlock sewing test and fine tuning Fine tuning for 3/4 thread over- Fine tuning for 3 thread lock and 3 thread narrow seam: flatlock The loops are formed on the underside: Increase the upper looper tension (blue). Reduce the lower looper
  • Bernina 2500DCET | Manual - Page 37
    Cover/chain stitch functions and general operating instructions Cover Stitch The 5 mm wide cover stitch is formed with two or three needle threads and one looper thread. The needle threads down. The cover stitch formation ends with the needle inserted in the fabric. Note: When sewing is completed or
  • Bernina 2500DCET | Manual - Page 38
    needles by turning the handwheel backwards, i.e. away from you in a clockwise direction. WARNING: If sewing in top & bottom cover stitch mode, when lifting the presser foot to its highest position (2), do not use any force. 1 Looper conversion arm · Lower the needle clamp, press Needle stop. The
  • Bernina 2500DCET | Manual - Page 39
    09.10.2007 14:35 Uhr Seite 40 Cover/chain stitch functions and general operating instructions Mechanical safety In addition to the electronic safety features (page 14) your machine is equipped with mechanical safety features. The looper cover can only be closed when: · the position of
  • Bernina 2500DCET | Manual - Page 40
    Umschlag_GB.indd 2 © Copyright 1999 by BERNINA International AG, Steckborn 10.10.2007 16:19:00 Uhr 99/6 GB
  • Bernina 2500DCET | Manual - Page 41
    hold both parts parallel and push the plate to the right until it clicks into place. Note: The looper cover will not close and the machine will not sew when: · the position of the conversion arm does not correspond to the extension plate (cover/chain stitch) or knife guard (overlock) · the
  • Bernina 2500DCET | Manual - Page 42
    4 thread cover stitch (position F) Cover stitch looper (purple markings) 1 2 Place the spool on the spool pin as illustrated. 2 3 42 11 10 4 5 7 6 8 9 1. Bring the thread up from the spool and lay it from the back to the front into the guide. 2. Thread the first guide. 3. Take the thread
  • Bernina 2500DCET | Manual - Page 43
    8 Threading 4-thread cover stitch Place the spool on the spool pin as illustrated. 1. Bring the thread up from the spool and lay it from the back to the front into the guide. 2. Thread the first guide. 3. Take the thread through the groove. 4., 5., 6. Take the thread under the thread guide
  • Bernina 2500DCET | Manual - Page 44
    Uhr Seite 44 Threading 4-thread cover stitch Cover stitch needle C (green markings) 1 2 2 44 3 5 6 7 4 8 8 Place the spool on the spool pin as illustrated. 1. Bring the thread up from the spool and lay it from the back to the front into the guide. 2. Thread the first guide. 3. Take the
  • Bernina 2500DCET | Manual - Page 45
    take up and into the guide. 7. Thread guide on the needle clamp. 8. Thread the needle L from front to back and lay the thread to the left under the foot. After threading Lower the presser foot and close the looper cover. Switch the power switch to on «1». Test sew: Place a piece of fabric
  • Bernina 2500DCET | Manual - Page 46
    Cover stitch needle R (brown markings) Cover stitch needle L (yellow markings) Place the spool on the spool pin as illustrated. As described on page 43 and 45. 1 1 2 2 3 3 5 6 74 4 88 88 After threading Test sew: Place a piece of fabric under the presser foot and needles, begin sewing
  • Bernina 2500DCET | Manual - Page 47
    Uhr Seite 47 Threading 3-thread narrow cover stitch Cover stitch looper (purple markings) 1 Place the spool on the spool pin as illustrated. 2 2 3 1. Bring the thread up from the spool and lay it from the back to the front into the guide. 2. Thread the first guide on the machine. 10 3. Take
  • Bernina 2500DCET | Manual - Page 48
    as illustrated. Test sewing with 4 thread (3-needles) cover stitch has been completed. The presser foot is raised, the needle threads are released, the material has been pulled away to the left and threads cut. You are now ready to thread for the 5 thread top & bottom cover stitch. the machine is
  • Bernina 2500DCET | Manual - Page 49
    markings) Test sewing with 3 thread (2-needles, 5mm) cover stitch has been completed. The presser foot is raised, the needle threads are released, the material has been pulled away to the left and threads cut. You are now ready to thread for the 4 thread top & bottom cover stitch. The machine is
  • Bernina 2500DCET | Manual - Page 50
    ) Test sewing with 3 thread (2-needles, 2.5mm) cover stitch has been completed. The presser foot is raised, the needle threads are released, the material has been pulled away to the left and threads cut. You are now ready to thread for the 4 thread top & bottom narrow cover stitch. The machine is
  • Bernina 2500DCET | Manual - Page 51
    15:00 Uhr Seite 51 A B CE D E AB C D Cover stitch sewing test and fine tuning Cover stitch sewing test and fine tuning After threading, check that the stitch selection dial is on your desired position for F. Test sew. Starting to sew: Raise the presser foot and place a double layer of fabric
  • Bernina 2500DCET | Manual - Page 52
    09.10.2007 15:00 Uhr Seite 52 Top & bottom cover stitch test sewing and fine tuning Securing the seam end After removing your work turn it over to the wrong side. Secure the seam by pulling the loop (1) towards the left. If the looper thread is subsequently pulled to the upper side, 1 2 the
  • Bernina 2500DCET | Manual - Page 53
    (purple markings) 2 Chain stitch threading (position G) Place the spool on the spool 1 pin as illustrated. 10 9 6 7 8 2 3 4 5 1. Bring the thread up from the spool and lay it from the back to the front into the guide. 2. Thread the first guide. 3. Take the thread through the groove
  • Bernina 2500DCET | Manual - Page 54
    54 Chain stitch threading Chain stitch needle R (brown markings) 1 2 2 3 5 6 54 7 4 8 8 Place the spool on the spool pin as illustrated. 1. Bring the thread up from the spool and lay it from the back to the front into the guide. 2. Thread the first guide. 3. Take the thread through the
  • Bernina 2500DCET | Manual - Page 55
    Uhr Seite 55 Chain stitch sewing test and fine tuning Sewing test After threading check that the stitch selection dial is on position G. Test sew. Starting to sew: Raise the presser foot and place a double layer of fabric under the presser foot and needle. Lower the presser foot. To make the first
  • Bernina 2500DCET | Manual - Page 56
    09.10.2007 15:01 Uhr Seite 56 Chain stitch sewing test and fine tuning 1 2 Securing the seam end After removing your work turn it over to the wrong side. Secure the seam by pulling the loop (1) towards the left. If the looper thread is subsequently pulled to the upper side, the needle
  • Bernina 2500DCET | Manual - Page 57
    markings) leaving 8 cm or 3" of thread hanging in the machine. Close the looper cover. 12. Thread cover or chain stitch needles, place threads under the presser foot. 13. Swing back presser foot. Adjust the stitch length and differential feed to suit the stitch and fabric. 14. Sew to the end of the
  • Bernina 2500DCET | Manual - Page 58
    stitch (position H) Test sewing with 4 thread (3-needles) cover stitch has been completed. The presser foot is raised, the needle threads are released, the material has been pulled away to the left and threads cut. You are now ready to thread for the 5 thread top & bottom cover stitch. The machine
  • Bernina 2500DCET | Manual - Page 59
    stitch) Sewing with 5 thread (3-needle ) top & bottom cover stitch has been completed. The presser foot is raised, the needle threads are released, the material has been pulled away to the left and threads cut. You are now ready to convert back to cover/chain stitch position F/G and the machine
  • Bernina 2500DCET | Manual - Page 60
    to stitch selected. 9. Thread needle(s). 10. Swing presser foot back. 11. Lower the upper knife arm and upper knife if necessary. 12. Close the looper cover and attach the waste collector. 13. Adjust the stitch length, differential feed and cutting width to suit stitch and fabric. 14. Test sew
  • Bernina 2500DCET | Manual - Page 61
    - Overlock Pins If you pin your work, remove the pins while sewing before they get near the knife, or pin parallel about 2 cm (1") from the fabric edge (see 1, 2). Tip: Use pins with coloured heads which are easier to see in thicker, soft fabrics. ▲1 ▼2 Tape guide The standard presser foot is
  • Bernina 2500DCET | Manual - Page 62
    needle threads from the thread chain with a pin or the BERNINA seam ripper and pull the threads gently to gather fine fabrics. Presser foot markings The markings on the presser foot help to guide the fabric. A Cutting line (cutting width 2) B Needle R insertion point (cover and chain stitch only
  • Bernina 2500DCET | Manual - Page 63
    15:01 Uhr Seite 63 Practical Sewing - Overlock Seam guide right Loosen the screw. Position the attachment (accessory bag) over the screw and retighten the screw. Pull out the adjustable guide to the right until it is line with the desired marking on the looper cover. Feed the fabric edge along the
  • Bernina 2500DCET | Manual - Page 64
    Overlock ▲1 ▼3 ▲2 Sewing in the thread chain - seam begin · Sew to form a 3-4 cm (2") chain. · Position fabric and sew one stitch. · Insert needles (Needle stop down). · Raise the presser foot. · Pull the thread chain slightly and from the left, place it under the presser foot (in the tape guide
  • Bernina 2500DCET | Manual - Page 65
    knife. · Lower the presser foot. · Lower the needles (Needle stop down). · If necessary, pull all the threads taut above the first machine guide. ▲1 ▲2 · Continue sewing (see 1, 2, 3). Sewing inside corners · Snip into the corner up to the stitching line. · Sew until the knife reaches the
  • Bernina 2500DCET | Manual - Page 66
    Sew. · When the seam is complete, sew a few stitches over the previous stitches without cutting. · Raise the tip of the presser foot and turn work away from you. · Sew off the edge (see 1, 2, 3). Unpicking seams Method 1: Cut the loops formed by the looper threads with sharp scissors or the BERNINA
  • Bernina 2500DCET | Manual - Page 67
    15:01 Uhr Seite 67 Simple hem Practical Sewing - Cover Stitch (top & bottom cover stitch) Stitch length: 3-4 Differential: N-2 (depending on fabric) · Mark hem depth and fold or press. · Place fabric under the foot and guide the folded edge along a line on the stitch plate. The hem is sewn and the
  • Bernina 2500DCET | Manual - Page 68
    Practical Sewing - Cover Stitch (top & bottom cover stitch) Edges with elastic Stitch length: 3-4 Differential: 0.7-N · Sew on elastic with 4-thread overlock · Turn the raw edge to the width of the elastic and topstitch from the right side. Guide the fold along the right section of the foot or use
  • Bernina 2500DCET | Manual - Page 69
    decorative 69 threads are used in the looper. Use the Deco Guide if necessary (page 36). · Draw pattern lines on the right or left side of the fabric. · Sew. Tip: Use a double layer of fabric or stabiliser. Remove or trim after sewing. Note: This applies to top & bottom cover stitch as well
  • Bernina 2500DCET | Manual - Page 70
    of the finished width. Mark if necessary and press. Place the binding right side to the wrong side of the fabric, pin if wanted and sew. Turn the binding to the right side and stitch from the right. Note: For fine fabrics use the cover stitch foot (compensating foot).
  • Bernina 2500DCET | Manual - Page 71
    in the groove so that the sharp edge is in line with the stitch plate. · Retighten the setscrew. · Lower the upper knife. · Close the looper cover. · Test sew. Replacing the bulb Using the special bulb holder provided in the accessory bag, press upwards against the bulb, turn to the left and remove
  • Bernina 2500DCET | Manual - Page 72
    09.10.2007 15:02 Uhr Seite 72 Trouble shooting guide Problem: Cause: Solution: The machine does not sew. The presser foot is up or the looper cover is open, the safety control lamp is on. Lower the presser foot. Close the looper cover. The main switch is not on. Switch
  • Bernina 2500DCET | Manual - Page 73
    for thread. Use the Deco Guide. Fabric edges curl: Too much fabric in the stitch. Reduce the cutting width. Stitch selection lever is on roll hem. Set selection lever to overlock. Thread loops are too loose. Too little fabric in the stitch. Increase the cutting width. Machine stops sewing
  • Bernina 2500DCET | Manual - Page 74
    hem 22 · stitch chart 26, 29 Sewing in tape 61 Sewing light 14 Sewing speed 11 Sewing test D Looper cover Practical sewing · chain stitch 55 Deco Guide Decorative edge finishes Decorative overlock threads Decorative stitching with cover stitch Details of machine Differential feed
  • Bernina 2500DCET | Manual - Page 75
    23 Thread tension 25 · checking cover stitch sewing test 51 · checking overlock sewing test 35 · fine tuning chain stitch 55 · fine tuning cover stitch 51 · fine tuning overlock 35 · special threads 36 Test sewing · chain stitch 55 · cover stitch/ top & bottom 51 · overlock 35
  • Bernina 2500DCET | Manual - Page 76
    foot lifter: Two-step. Max. lift 7 mm. Integrated accessories: Roll hemmer, tape guide Handwheel: Rotates forwards (counter-clockwise) Needle system: 130/705H (JLx2 can be used if necessary for cover/chain stitch) Electronic needle stop: Cover stitch/top & bottom Chain stitch Overlock
  • Bernina 2500DCET | Manual - Page 77
    stitch foot Elasticator Optional accessories Cording foot Gathering attachment Multi-purpose foot with guide Sewing Service Leaflet 16 Blind Stitch Foot Explains use and applications. 4 pages Sewing Service Leaflet 17 Cording Foot Explains use and applications. 4 pages Sewing Service
  • Bernina 2500DCET | Manual - Page 78
    78 BERNINA Publications BERNINA BERNINA Sewing Service Creative Leaflets Sewing BERNINA Collection It is not possible to cover more than the basics of sewing in an instruction manual. However, the creative potential of your BERNINA overlocker and sewing machines is enormous. To help you use
  • Bernina 2500DCET | Manual - Page 79
    ndler eine Bedienungsanleitung in der entsprechenden Sprache an. If this machine has been purchased in a foreign country, please request an instruction manual in your own language from the national Importer or a BERNINA dealer. Si cette machine est vendue dans une autre région linguistique, demandez
  • Bernina 2500DCET | Manual - Page 80
    2500_DCE_2_englisch_neu 10.10.2007 15:14 Uhr Seite 80 Copyright 1999 by BERNINA International AG CH-8266 Steckborn Art. no. A 9150-779-Z00
  • Bernina 2500DCET | Manual - Page 81
    BERNINA® 2500DCET NL NC NR UL LL SSL SL CW 1 4 thread overlock with integrated safety system 2.5 2 2 3 thread super stretch 2.5 1-2 3 3 thread overlock 2.5 2 A 4 2 thread wrapped overlock 2.5 2 5 3 thread narrow seam 1-1.8 1-2 6 2 thread
  • Bernina 2500DCET | Manual - Page 82
    14. Test sew: Place a piece of fabric under the presser foot and needle(s), lower the presser foot. Sew. Continue ­sewing at the end of the seam until an 8 cm or 3" chain if formed. Cut threads. Converting from cover stitch position F (4 thread cover stitch) to top & bottom cover stitch (position
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
Instruction Manual
Overlocker / Serger
2500
DCET
Umschlag_GB.indd
1
10.10.2007
16:18:59 Uhr