Bernina 2500DCET Manual - Page 31

Lower looper

Get Bernina 2500DCET PDF manuals and user guides View all Bernina 2500DCET manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

2500_DCE_1_englisch_neu 09.10.2007 14:35 Uhr Seite 32 Overlock threading Lower looper (red markings) 2 Place the spool on the spool 1 pin as illustrated. 32 10 9 6 7 8 2 3 4 5 1. Bring the thread up from the spool and lay it from the back to the front into the guide. 2. Thread the first machine guide. 3. Slip the thread through the groove. 4., 5., 6., 7. Thread the guides. 8. Press the lever on the auto-threader down. 9. Thread the slit on the threader. Push the autothreader lever up to return it to its normal position. 10. Thread the lower looper eye and lay the thread to the left under the presser foot. Note: If the lower looper has to be re-threaded, cut off both needle threads and remove surplus thread from below. First thread the looper and then rethread the needles.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
32
Overlock threading
2
1
2
3
4
5
6
7
8
9
10
Lower looper
(red markings)
Place the spool on the spool
pin as illustrated.
1. Bring the thread up from
the spool and lay it from
the back to the front into
the guide.
2. Thread the first machine
guide.
3. Slip the thread through
the groove.
4., 5., 6., 7. Thread the
guides.
8. Press the lever on the
auto-threader down.
9. Thread the slit on the
threader. Push the auto-
threader lever up to
return it to its normal
position.
10. Thread the lower looper
eye and lay the thread to
the left under the presser
foot.
Note:
If the lower looper has to
be re-threaded, cut off
both needle threads
and remove surplus thread
from below. First thread
the looper and then re-
thread the needles.
2500_DCE_1_englisch_neu
09.10.2007 14:35 Uhr
Seite 32