Bernina 732 Manual - Page 45
single, operation
View all Bernina 732 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
• I II • Fig. 57 Fig. na 5. Sewing the fastening threads For stitching the fastening threads, pull the zigzag lever 18 - which is still against stop II - towards the front and push it entirely to the right, passing thereby over stop 1 i see fig. 60). In this position the machine now sews the plain stitch, in order to make fastening threads. When stitching these securing fastening threads, it will be advisable to hold the fabric slightly back. For the next buttonhole zigzag lever• 18 and the other levers should be adjusted as mows: 1. Set zigzag lever 18 again against stop I. 2. Turn lever 17 to the left, until the white lines of the levees 17 and 18 are facing each. other. ; Fig. 55 Fig. 60 :3. Push the stitch length regulating lever 22 upwards as far as possible, until it hurts the stop. Now the machine is again correctly adjusted for buttonhole sewing and the handling of zigzag lever 18 is again effected as stated under .• the step by step sewing of the buttonhole Sewing the buttonhole in one single operation In contrast to the described method, the buttonhole can easily be sewn in one operation, i.e. without stoppingthe machine after the different workingsteps. The buttonhole is sewn in one Operation as follows: After having adjusted the machine for buttonhole sewing and having pressed zigzag lever 18 against stop I tsee fig.:54), set the machine going and keep 43