Bernina 830LE Manual - Page 90
Edge Finishing
View all Bernina 830LE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Practical Applications Edge Finishing Narrow Edgestitching Wide Edgestitching Outer Edges ► place edge of fold against the guide on the Blindstitch foot ► select needle position at desired distance from the folded edge ► foot no. 5: use any left or far right needle position ► foot no. 1C and no. 10 / 10C / 10D: any needle position is possible Hem Edges ► place edge of fold against the guide on the Blindstitch foot (inside upper edge of hem) ► select needle position to the right to sew along the upper edge ► Reverse pattern foot no. 1C ► Blindstitch foot no. 5 ► Edge stitch foot no. 10 / 10C / 10D (optional accessory) There are three options for wide edge stitching ► guide the folded edge along the edge of the presser foot ► guide the folded edge along the marks on the stitch plate (for stitching 3/8" to 1" from the edge (1 to 2.5cm) ► insert the adjustable seam guide into the hole on the back of the presser foot shaft ► adjust as desired ► tighten the screw ► guide the folded edge along the seam guide ► to sew parallel wider lines, guide the seam guide along a previously sewn line of stitches 90