Binatone MBP 43S User Guide - Page 14

4.5 Alarm 1. Press the M Menu button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until A is highlighted. 3. Press the + UP button or - DOWN button to select the alarm time (6h, 4h, 2h). (The default setting is Alarm .) If an alarm is set, the parent unit will beep for about 45 seconds after every 6, 4 or 2 hour period, and the alarm icon will flash red. 4.6 Camera Control 4.6.1 Add (pair) a camera 1. Press the M Menu button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until C is highlighted, and the /+/ / menu will pop up. 3. Press the + UP button or - DOWN button to select +, and press the OK button to confirm. 4. C 1 / C 2 / C 3 / C 4 will pop up, press the + UP button or - DOWN button to select the desired CAM, and press the OK button to start searching for a camera unit. The green audio level LED will flash rapidly while searching. 5. Press and hold the PAIR button under the baby unit until the parent unit finds the camera, beeps and the camera picture appears. NOTE A camera can only be registered to one parent unit at a time. 4.6.2 View a camera 1. Press the M Menu button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until C is highlighted and the /+/ / menu pops up. 3. Press the + UP button or - DOWN button to select , and press the OK button to confirm. 4. C 1 / C 2 / C 3 / C 4 will pop up, press the + UP button or - DOWN button to select desired CAM, and press the OK button to view the picture from that camera. TIP Press OK repeatedly for a quick way to View cameras without the menu. 14 Parent Unit Menu Options