Biostar A780L3B Bios Setup - Page 31

CPU/HT Reference Clock MHz, CPU Over Voltage, Custom P-States, Core FID, Core DID, Core VID, NB FID - 6 core

Get Biostar A780L3B PDF manuals and user guides View all Biostar A780L3B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

A780L3B BIOS Manual CPU/HT Reference Clock (MHz) This item allows BIOS to select CPU Over Clock. Options: 200 (Default) / 200~600 CPU Over Voltage This item allows you to change CPU voltage value. Custom P-States This item tells BIOS whether to use the setup options below this to configure the P-States, or whether to configure the P-States automatically. Options: Disabled (Default) / Enabled Core FID This item allows you to select the Ratio/Frequency of AM3 CPU. Options: x8.0 1600MHz ~ x15.5 3100MHz (Differed by CPU) Core DID Options: Divided by 1 (Default) / Divided by 2 / Divided by 4 / Divided by 8 / Divided by 16 Core VID This function allows you to adjust the voltage of AM3 CPU. NB FID This item allows you to select the Frequency of NB chip. Options: 800MHz ~ 2000MHz (Differed by CPU) HT Link Speed The HyperTransport link will run at this speed if it is slower than or equal to the system clock and the board is capable. Options: Auto (Default) / 200MHz / 400MHz / 600MHz / 800MHz / 1GHz / 1.2GHz / 1.4GHz / 1.6GHz / 1.8GHz / 2.0GHz HT Link Width The HyperTransport link will run at this width. Options: Auto (Default) / 8 Bit / 16 Bit 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
A780L3B BIOS Manual
30
CPU/HT Reference Clock (MHz)
This item allows BIOS to select CPU Over Clock.
Options:
200 (Default) / 200~600
CPU Over Voltage
This item allows you to change CPU voltage value.
Custom P-States
This item tells BIOS whether to use the setup options below this to configure the
P-States, or whether to configure the P-States automatically.
Options:
Disabled (Default) / Enabled
Core FID
This item allows you to select the Ratio/Frequency of AM3 CPU.
Options:
x8.0 1600MHz ~ x15.5 3100MHz (Differed by CPU)
Core DID
Options:
Divided by 1 (Default) / Divided by 2 / Divided by 4 / Divided by 8 /
Divided by 16
Core VID
This function allows you to adjust the voltage of AM3 CPU.
NB FID
This item allows you to select the Frequency of NB chip.
Options:
800MHz ~ 2000MHz (Differed by CPU)
HT Link Speed
The HyperTransport link will run at this speed if it is slower than or equal to the
system clock and the board is capable.
Options:
Auto (Default) / 200MHz / 400MHz / 600MHz / 800MHz / 1GHz /
1.2GHz / 1.4GHz / 1.6GHz / 1.8GHz / 2.0GHz
HT Link Width
The HyperTransport link will run at this width.
Options:
Auto (Default) / 8 Bit / 16 Bit