Biostar G31-M7 Bios Setup - Page 21
Biostar G31-M7 Manual
View all Biostar G31-M7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
G31-M7/P31-A7 Onboard LAN Boot ROM This item allows you to select the Onboard LAN Boot ROM. The Choices: Disabled Rom (default),Int 18h, Int 19h,PnP/BEV. Super IO Device Onboard FDC Controller Select enabled if your system has a floppy disk controller (FDC) installed on the system board and you wish to use it. If you installed another FDC or the system uses no floppy drive, select disabled in this field. The Choices: Enabled (default), Disabled. Onboard Serial Port 1 Select an address and corresponding interrupt for the first and second serial ports. The Choices: 3F8/IRQ4 (default), Disabled, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3, Auto. Onboard Parallel Port This item allows you to determine access onboard parallel port controller with which I/O Address. The Choices: 378/IRQ7 (default), 278/IRQ5, 3BC/IRQ7, Disabled. 20