Biostar G31-M7 Bios Setup - Page 22
Biostar G31-M7 Manual
View all Biostar G31-M7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
G31-M7/P31-A7 Parallel Port Mode This item allows you to determine how the parallel port should function. The default value is SPP. The Choices: SPP (default) Using Parallel port as Standard Printer Port. EPP Using Parallel Port as Enhanced Parallel Port. ECP Using Parallel port as Extended Capabilities Port. ECP+EPP Using Parallel port as ECP & EPP mode. ECP Mode Use DMA Select a DMA Channel for the port. The Choices: 3 (default), 1. USB Device Setting USB 1.0/2.0 Controller This entry is to enabled/ disabled EHCI controller only. This Bios itself may/may not have high speed USB support. If the Bios has high speed USB support built in,the support will be automately turn on when high speed device were attached. The Choices: Enabled (default), Disabled. 21