Biostar G31-M7 Bios Setup - Page 27

Biostar G31-M7 Manual

Page 27 highlights

G31-M7/P31-A7 Soft-Off by PBTN This item determines the behavior of system power button. Instant off turn off the power immediately, and Delay 4 Sec. will require you to press and hold the power button for 4 seconds to cut off the system power. The Choices: Delay 4 Sec, Instant-Off (default). Wake-Up by PCI card When you select "Enable", a PME signal from PCI card returns the system to Full On state. The Choices: Disabled (default), Enabled. Power On by Ring An input signal on the serial Ring Indicator (RI) line (in other words, an incoming call on the modem) awakens the system from a soft off state. The Choices: Enabled, Disabled (default). USB KB/MS Wake-Up From S3 This item allows you to enable or disabled the USB keyboard/mouse wake up from S3 function. The Choices: Disabled (default), Enabled. Resume by Alarm This function is for setting date and time for your computer to boot up. When enabled, you can choose the date and time of system resume. The Choices: Disabled (default), Enabled. Date (of Month) Alarm You can choose which month the system will boot up. Time (hh:mm:ss) Alarm You can choose the system boot up time, input hour, minute and second to specify. Note: If you have change the setting, you must let the system boot into operating system, before this function will work. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39

G31-M7/P31-A7
26
Soft-Off by PBTN
This item determines the behavior of system power button. Instant off turn off
the power immediately, and Delay 4 Sec. will require you to press and hold the
power button for 4 seconds to cut off the system power.
The Choices:
Delay 4 Sec,
Instant-Off
(default).
Wake-Up by PCI card
When you select “Enable”, a PME signal from PCI card returns the system to
Full On state.
The Choices: Disabled
(default), Enabled.
Power On by Ring
An input signal on the serial Ring Indicator (RI) line (in other words,
an incoming call on the modem) awakens the system from a soft off state.
The Choices:
Enabled,
Disabled
(default).
USB KB/MS Wake-Up From S3
This item allows you to enable or disabled the USB keyboard/mouse wake up
from S3 function.
The Choices: Disabled
(default), Enabled.
Resume by Alarm
This function is for setting date and time for your computer to boot up. When
enabled, you can choose the date and time of system resume.
The Choices: Disabled
(default), Enabled.
Date (of Month) Alarm
You can choose which month the system will boot up.
Time (hh:mm:ss) Alarm
You can choose the system boot up time, input hour, minute and second to
specify.
Note:
If you have change the setting, you must let the system boot into
operating system, before this function will work.