Biostar IDEQ 200TB iDEQ 200T BIOS setup guide

Biostar IDEQ 200TB Manual

Get Biostar IDEQ 200TB PDF manuals and user guides View all Biostar IDEQ 200TB manuals
Add to My Manuals
Save this manual to your list of manuals

Biostar IDEQ 200TB manual content summary:

  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 1
    P4TBA BIOS Setup BIOS Setup 1 1 Main Menu...3 2 Standard CMOS Features 6 3 Advanced BIOS Features 9 4 Advanced Chipset Features 12 5 Integrated Peripherals 15 6 Power Management Setup 20 7 PnP/PCI Configurations 24 8 PC Health Status 26 9 Frequency Control 28 i
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 2
    is then stored in battery-backed RAM so that it retains the Setup information when the power is turned off. The Award BIOS™ installed in your computer system's ROM (Read Only Memory) is a custom version of an industry standard BIOS. This means that it supports INTEL® processor input/output system
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 3
    P4TBA BIOS Setup PCI Bus Support This AWARD BIOS also supports Version 2.1 of the Intel PCI (Peripheral Component Interconnect) local bus specification. DRAM Support DDR SDRAM (Double Data Rate Synchronous DRAM) are supported. Supported CPUs This AWARD BIOS supports the INTEL® CPU. Using Setup In
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 4
    P4TBA BIOS Setup 1 Main Menu Once you enter Award BIOS™ CMOS Setup Utility, the Main Menu will appear on WARNING !! The information about BIOS defaults on manual (Figure 1,2,3,4,5,6,7,8,9) is just for reference, please refer to the BIOS installed on board, for update information. Figure 1. Main Menu
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 5
    P4TBA BIOS Setup Input/ Output features. Power Management Setup This submenu allows you to configure the power management features. PnP/PCI clock may cause CPU or M/B damage!) Load Optimized Defaults This selection allows you to reload the BIOS when the system is having problems particularly with
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 6
    P4TBA BIOS Setup Set User Password If the Supervisor Password is not set, then but will not be able to change them. Save & Exit Setup Save all configuration changes to CMOS(memory) and exit setup. Confirmation message will be displayed before proceeding. Exit Without Saving Abandon all changes made
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 7
    P4TBA BIOS Setup 2 Standard CMOS Features The items in Standard CMOS Setup Menu are divided into 10 categories. Each category includes no, one or more than one
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 8
    P4TBA BIOS Setup Main Menu Selections This table shows the selections that you can make on the Main Menu. Item Options 2M, 5.25 in 720K, 3.5 in Select the type of floppy disk drive installed in your system. 1.44M, 3.5 in 2.88M, 3.5 in None Video EGA/VGA CGA 40 Select the default
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 9
    P4TBA BIOS Setup Item Halt On Base Memory Extended Memory Total Memory Options All Errors No Errors All, but Keyboard All, but Diskette All, but Disk/ Key N/A N/A N/A Description Select the situation in which you want the BIOS to stop the POST process and notify you. Displays the amount of
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 10
    P4TBA BIOS Setup 3 Advanced BIOS Features Figure 3. Advanced BIOS Setup Boot Seq & Floppy Setup Hard the menu. The Choices: 1. 2. 3. 4. 5. First/ Second/ Third/ Boot Other Device These BIOS attempt to load the operating system from the device in the sequence selected in these items. The Choices:
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 11
    P4TBA BIOS Setup The Choices: Disabled (default), Enabled. Report No. FDD for WIN 95 The Choices: No (default), Yes. Cache Setup CPU L1 & L2 Cache This option helps you to enable or disable "Level 1" or "Level 2" cache on the CPU, which may improve performance. The Choices: Enabled (default),
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 12
    The Choices: Enabled (default), Disabled. MPS Version Control For OS The BIOS supports version 1.1 and 1.4 of the Intel multiprocessor specification. Select version supported by the operation system running on this computer. The Choices: 1.4 (default), 1.1. OS Select For DRAM > 64MB A choice other
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 13
    P4TBA BIOS Setup 4 Advanced Chipset Features This submenu allows you to configure the specific features of the chipset installed on your system. This chipset manage bus speeds and access to system memory timing. The Choices: By SPD (Default), Manual CAS Latency Time When synchronous DRAM is installed
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 14
    memory area, a system error may result. The Choices: Enabled (default), Disabled. Video BIOS Cacheable Select Enabled allows caching of the video BIOS memory usually2 discussed their memory requirements. The Choices: Disabled (default), enabled. Delay Prior to Thermal Set this item to enable the CPU
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 15
    P4TBA BIOS Setup of the PCI memory address range dedicated for graphics memory address space. Host cycles that hit the aperture range are forwarded to the AGP without any translation. The Choices: 128M (default), 4, 8, 16, 32, 64, 256.
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 16
    P4TBA BIOS Setup 5 Integrated Peripherals Figure 5. Integrated Peripherals On-Chip IDE Device The chipset contains a PCI IDE interface with support for two IDE channels. Select "Enabled" to activate the first and / or second IDE interface. If you install a primary and / or secondary add-in IDE
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 17
    P4TBA BIOS Setup interface. Select "Disabled" to deactivate an interface if you bus master driver). If your hard drive and your system software both support Ultra DMA/100, select Auto to enable BIOS support. The Choices: Auto (default), Disabled. SATA Mode The Choices: IDE (default), RAID. On-Chip
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 18
    P4TBA BIOS Setup USB Keyboard/Mouse Support This item allows you to enable or disable the USB Keyboard/ Mouse Legacy Support. The Choices: Disabled (default), Enabled AC97 Audio/ Modem This item allows you to decide to enable/ disable to support Power on Function This item allows you to choose Power
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 19
    manual intervention. There are 3 sources that provide current to the CMOS area that retains these Power-On instructions; the motherboard battery (3V), the Power Supply (5VSB), and the Power Supply (3.3V). While AC is not supplying power, the motherboard uses the motherboard battery (3V). If AC power
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 20
    P4TBA BIOS Setup "On" "Off" (default) power is lost. Means always set CMOS to the "On" status when AC power is lost Means always set CMOS to the "Off" status when AC power is lost. For example: If set to "Former-Sts" and AC power is lost when system is live, then after AC power is restored, the
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 21
    P4TBA BIOS Setup 6 Power Management Setup The Power Management Setup Menu allows you to configure your system to utilize energy conservation and power up/power down features. Figure 6. Power Management Setup ACPI function This item displays the status of the Advanced Configuration and Power
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 22
    P4TBA BIOS Setup Min. Power Saving Minimum power management. Suspend Mode = 1 hr. HDD Power Down = 15 min Max. Power Saving Maximum power management only available for sl CPU's. Suspend Mode = 1 min. HDD Power Down = 1 min. User Defined (default) Allows you to set each mode individually. When not
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 23
    P4TBA BIOS Setup When enabled and after the set time of system inactivity, all devices except the CPU will be shut off. The Choices: Disabled (default), 1 Min, 2 Min, 4 Min, 8 Min, 12 Min, 20 Min, 30 Min. HDD Power Down When enabled, the hard disk drive will power down and after a set time of system
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 24
    P4TBA BIOS Setup Secondary IDE 0/1 The Choices: Disabled (Default), Enabled. FDD, COM, LPT Port The Choices: Disabled (Default), Enabled. PCI PIRQ [A-D]# The Choices: Disabled (Default), Enabled. 23
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 25
    P4TBA BIOS Setup 7 PnP/PCI Configurations This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed of the CPU itself uses when communicating with its own special components. This section
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 26
    P4TBA BIOS Setup Resources Controlled By By Choosing "Auto(ESCD)" (default), the system BIOS will detect the system resources and automatically assign the relative IRQ and DMA channel for each peripheral.By Choosing "Manual", the user will need to assign IRQ & DMA for add-on cards. Be sure that
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 27
    P4TBA BIOS Setup 8 PC Health Status Figure 8. PC Health Status Showdown Temperature This item allows you to set up the CPU shutdown Temperature. This item only effective under Windows 98 ACPI mode. The Choices: Disabled (default), 60℃/140℉, 65℃/149℉, 70℃/158℉ CPU FAN Control by The Choice "smart"
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 28
    P4TBA BIOS Setup Current CPU Temperature Show you the current CPU temperature. Current SYS FAN Speed This field displays the current SYS FAN speed. Current CPU FAN Speed This field displays the current CPU FAN speed. Show H/W Monitor in POST If you computer contain a monitoring system, it will show
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 29
    P4TBA BIOS Setup 9 Frequency Control Figure 9. Frequency Control CPU Clock Ratio Min=8 Max=50 Key in a DEC number: CPU Voltage Regulator This item allows you to select CPU Voltage Regulator. The Choices: Default (default), +8.1%, +5.5%, +2.5% DRAM Voltage Regulator This item allows you to select
  • Biostar IDEQ 200TB | iDEQ 200T BIOS setup guide - Page 30
    P4TBA BIOS Setup Spread Spectrum This item allows you to enable or disable the Spread Spectrum. The Choices: Enabled (Default), Disabled. CPU Clock This item allows you to select CPU Clock, and CPU over clocking. Min=100 Max=255 Key in a DEC number: 29
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
P4TBA BIOS Setup
i
BIOS Setup
.......................................................................................
1
1 Main Menu
....................................................................................................
3
2 Standard CMOS Features
..............................................................................
6
3 Advanced BIOS Features
..............................................................................
9
4 Advanced Chipset Features
.........................................................................
12
5 Integrated Peripherals
.................................................................................
15
6 Power Management Setup
...........................................................................
20
7 PnP/PCI Configurations
..............................................................................
24
8 PC Health Status
.........................................................................................
26
9 Frequency Control
.......................................................................................
28