Biostar IDEQ 200TB iDEQ 200T BIOS setup guide - Page 18

P4TBA BIOS Setup USB Keyboard/Mouse Support This item allows you to enable or disable the USB Keyboard/ Mouse Legacy Support. The Choices: Disabled (default), Enabled AC97 Audio/ Modem This item allows you to decide to enable/ disable to support AC97 Audio/Modem. The Choices: Auto (default), Disabled. Onboard PCI LAN This item allows you to enable or disable the onboard PCI LAN. The Choices: Enabled (Default), Disabled. Onboard LAN Boot ROM This item helps to decide whether to invoke the boot ROM of the onboard LAN Chip. The Choices: Enabled (Default), Disabled. Onboard I/O Device Power on Function This item allows you to choose Power On Function. The Choices: Button only (default), Password, Hot Key, Mouse Move, Mouse Click, Any key, Remote IR. Keyboard Power on Password This item allows you to choose Power On Function. The Choices: Button only (default), Password, Hot Key, Mouse Move, Mouse Hot Key Power On Input password and press Enter to set the Keyboard power on password . The Choices: Ctrl-F1(default) , Ctrl-F2 , Ctrl-F3 , Ctrl-F4 , Ctrl-F5, Ctrl-F6 , Ctrl-F7 , Ctrl-F8 Onboard FDC Controller Select Enabled if your system has a floppy disk controller (FDC) installed on the system board and you wish to use it. If install and FDC or the system has no floppy drive, select Disabled in this field. The Choices: Enabled (default), Disabled. Onboard Serial Port 1 Select an address and corresponding interrupt for the first and second serial ports. The Choices: 3F8/IRQ4 (default), Disabled, Auto, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3. 17