Biostar N4SIE-A7 N4SIE-A7 BIOS guide - Page 11

N4SIE-A7 Cache Setup These BIOS attempt to load the operating system from the device in the sequence selected in these items. CPU L1&L2 Cache Depending on the CPU/chipset in use, you may be able to increase memory access time with this option. Enabled (default) Enable cache. Disabled Disable cache. CPU L3 Cache Depending on the CPU/chipset in use, you may be able to increase memory access time with this option. Enabled (default) Enable cache. Disabled Disable cache. CPU Feature Thermal Management This option allows you to select the way to control the "Thermal Management." The Choices: Thermal Monitor 1 (Default), Thermal Monitor 2. TM2 Bus Ratio This option represents the frequency (bus ratio of the throttled performance state that will be initiated when the on-diesensor goes from not hot to hot.) Min= 0 Max= 255 Key in a DEC number= The Choices: 0 X (Default) TM2 Bus VID This option represents the voltage of the throttled performance state that will be initiated when the on-diesensor goes from not hot to hot. The Choices: 0.8375V (Default), 0.8375-1.6000. Limit CPUID MaxVal Set Limit CPUID MaxVal to 3, it should be "Disabled" for WinXP. The Choices: Disabled (Default), Enabled C1E Function CPU C1E Function select. The Choices:Auto (Default) Execute Disable Bit The Choices: Enabled (Default), Disabled. Virtualization Technology When enabled, a VMM can utilize the additional hardware capabilities provided by vanderpool Technology. The Choices: Enabled (Default), Disabled. 10