Biostar N4SIE-A7 N4SIE-A7 BIOS guide - Page 13

Security Option, APIC MODE, MPS Version Control For OS, OS Select For DRAM > 64MB, Small Logo EPA - specification

Page 13 highlights

N4SIE-A7 Security Option This option will enable only individuals with passwords to bring the system online and/or to use the CMOS Setup Utility. System A password is required for the system to boot and is also required to access the Setup Utility. Setup (default) A password is required to access the Setup Utility only. This will only apply if passwords are set from the Setup main menu. APIC MODE Selecting Enabled enables APIC device mode reporting from the BIOS to the operating system. The Choices: Enabled (default), Disabled. MPS Version Control For OS The BIOS supports version 1.1 and 1.4 of the Intel multiprocessor specification.Select version supported by the operation system running on this computer. The Choices: 1.4 (default), 1.1. OS Select For DRAM > 64MB A choice other than Non-OS2 is only used for OS2 systems with memory exceeding 64MB. The Choices: Non-OS2 (default), OS2. Small Logo (EPA) Show This item allows you to select whether the "Small Logo" shows. Enabled (default) "Small Logo" shows when system boot up. Disabled No "Small Logo" shows when system boots up. Summary Screen Show This item allows you to enable/ disable display the Summary Screen Show. The Choices: Disabled (default), Enabled. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

N4SIE-A7
12
Security Option
This option will enable only individuals with passwords to bring the system online and/or
to use the CMOS Setup Utility.
System
A password is required for the system to boot and is
also required to access the Setup Utility.
Setup
(default)
A password is required to access the Setup Utility
only.
This will only apply if passwords are set from the Setup main menu.
APIC MODE
Selecting Enabled enables APIC device mode reporting from the BIOS to
the operating system.
The Choices: Enabled
(default), Disabled.
MPS Version Control For OS
The BIOS supports version 1.1 and 1.4 of the Intel multiprocessor specification.Select
version supported by the operation system running on this computer.
The Choices: 1.4
(default), 1.1.
OS Select For DRAM > 64MB
A choice other than Non-OS2 is only used for OS2 systems with memory exceeding 64MB.
The Choices:
Non-OS2
(default), OS2.
Small Logo (EPA) Show
This item allows you to select whether the “Small Logo” shows.
Enabled
(default) “Small Logo” shows when system boot up.
Disabled No “Small Logo” shows when system boots up.
Summary Screen Show
This item allows you to enable/ disable display the Summary Screen Show.
The Choices: Disabled
(default), Enabled.