Biostar P4SFA P4SFA BIOS setup guide - Page 17

P4SFA BIOS Setup IDE Burst Mode This item allows you enable/disable IDE Burst Mode. The Choices: Enabled (default), Disabled. SIS OnChip PCI Device If you highlight the literal "Press Enter" next to the "SIS OnChip PCI Device" label and then press the enter key, it will take you a submenu with the following options: SIS USB Controller This option allows you to control SIS USB Controlller. The Choices: Enabled (default), Disabled. USB Ports Number This option allows you to control USB Ports Number. The Choices: 6 (default), 5, 4, 3. USB 2.0 Supports This option allows you to enabled or disabled USB2.0 Supports. The Choices: Disabled, Enabled (default). USB Keyboard Support Enables support for USB attached keyboards. The Choices: Disabled (default), Enabled. SIS AC97 Audio This option allows you to control the onboard AC97 Audio. The Choices: Auto (default), Disabled. SIS S/W Modem This option allows you to control the onboard S/W Modem. The Choices: Auto (default), Disabled. SIS 10/100M ETHERNET This option allows you to control the 10/100M Ethernet. The Choices: Auto (default), Disabled. SIS MAC Address Input Onboard SuperIO Device If you highlight the literal "Press Enter" next to the "Onboard Super IO Device" label and then press the enter key, it will take you a submenu with the following options: Onboard FDC Controller Select Enabled if your system has a floppy disk controller (FDC) installed on the system board and you wish to use it. If install and FDC or the system has no floppy drive, select Disabled in this field. The Choices: Enabled (default), Disabled. 16