Biostar P4SFA P4SFA BIOS setup guide - Page 30

Spread Spectrum, CPU Frequency, DRAM Frequency

Get Biostar P4SFA PDF manuals and user guides View all Biostar P4SFA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

P4SFA BIOS Setup Spread Spectrum This item allows you to enable/disable the Spread Spectrum function. The Choices: Enabled (default), Disabled. CPU Frequency This item allows you to control CPU Frequency. The Choices: Default (default), 100MHz, 133MHz. DRAM Frequency This item allows you to control DRAM Frequency. The Choices: By SPD (default), 200MHz, 266MHz, 333MHz. If unfortunately, the system's frequency that you are selected is not functioning, there are two methods of booting-up the system. Method 1: Clear the CMOS data by setting the JCMOS1 ((2-3) closed)) as "ON" status. All the CMOS data will be loaded as defaults setting. Method 2: Press the key and Power button simultaneously, after that keep-on pressing the key until the power-on screen showed. This action will boot-up the system according to FSB of the processor. 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
P4SFA BIOS Setup
29
Spread Spectrum
This item allows you to enable/disable the Spread Spectrum function.
The Choices: Enabled
(default), Disabled.
CPU Frequency
This item allows you to control CPU Frequency.
The Choices: Default
(default), 100MHz, 133MHz.
DRAM Frequency
This item allows you to control DRAM Frequency.
The Choices: By SPD
(default), 200MHz, 266MHz, 333MHz.
If unfortunately, the system’s frequency that you are selected is
not functioning, there are two methods of booting-up the system.
Method 1: Clear the CMOS data by setting the JCMOS1 ((2-3) closed))
as “ON” status. All the CMOS data will be loaded as
defaults setting.
Method 2: Press the <Insert> key and Power button simultaneously,
after that keep-on pressing the <Insert> key until the
power-on screen showed. This action will boot-up the
system according to FSB of the processor.