Biostar P4SFA P4SFA BIOS setup guide - Page 23
Switch Function, Modem Use IRQ, Hot Key Function As, HDD Off After, Power Button Override, Power
View all Biostar P4SFA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
P4SFA BIOS Setup Switch Function You can choose whether or not to permit your system or enter complete suspend mode. Suspend mode offers greater power savings, with a correspondingly longer with a correspondingly longer awakening period. The Choices: Break/ Wake (default), Disabled. Modem Use IRQ This determines the IRQ, which can be applied in MODEM use. The Choices: Auto (default), 3, 4, 5, 7, 9, 10, 11, NA. Hot Key Function As This item allows you select Hot Key Function As Power Off (Ctrl-Alt-Backspace). The Choices: Power Off (default), Suspend, Disabled. HDD Off After After a selected period of drive inactivity, the hard disk drive will power down while all other devices remain active. The Choices: Disabled (default), 1 Min, 2 Min, 3 Min, 4 Min, 5 Min, 6 Min, 7 Min, 8 Min, 9 Min, 10 Min, 11 Min, 12 Min, 13 Min, 14 Min, 15 Min. Power Button Override When you select Delay 4 sec, pressing the power button for more than 4 seconds forces the system to enter the Soft-Off state. The Choices: Instant Off (default), Delay 4 Sec. Power State Resume Control This item allows you to select Power State Resume Control. The Choices: Always off (default), Always on, Keep Pre-State. PM Wake Up Events If you highlight the literal "Press Enter" next to the "PM Wake Up Events" label and then press the enter key, it will take you a submenu with the following options: IRQ [3-7, 9-15], NMI This item allows you enable/disable IRQ [3-7,9-15] NMI. The Choices: Enabled (default), Disabled. IRQ 8 Break Suspend This item allows you enable/disable IRQ8 Break Suspend. The Choices: Disabled (default), Enabled. RING/ WOL Power Up Control This item allows you to control the RING Power Up. The Choices: Enabled, Disabled (default). 22