Biostar TG31-A7 Setup Manual - Page 25
B. Memory Integration Test M.I.T. - t series
View all Biostar TG31-A7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
TG31-A7 Notices: Not all types of Intel CPU perform above overclock setting ideally; the difference will be based on the selected CPU model. B. Memory Integration Test (M.I.T.) This function is under "Overclocking Navigator Engine" item. MIT allows users to test memory compatibilities, and no extra devices or software are needed. Step 1 The default setting under this item is "Disabled"; the condition parameter should be changed to "Enable" to proceed this test. Main Advanced PCIPnP BIOS SETUP UTILITY Boot Chipset T-Series Exit T-Series Settings Options WARNING: Setting wrong values in below sections may cause system to malfunction. OverClock Navigator [Normal] =========== Automate OverClock System =========== Auto OverClock System [V6-Tech Engine] Manual OverClock System CPU Frequency Setting [200] PCIE Clock By [Auto] PCIE Frequency Setting [100] CPU Voltage [Default] FSB Voltage [Default] Chipset Voltage [Default] Memory Voltage [Default] DRAM Frequency [Auto] Configure DRAM Timing by SPD [Enabled] Integrated Memory Test [Disabled] Disabled Enabled Select Screen Select Item EnterGo to Sub Screen F1 General Help F10 Save and Exit ESC Exit vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc. ↓ Main Advanced PCIPnP BIOS SETUP UTILITY Boot Chipset T-Series Exit T-Series Settings WARNING: Setting wrong values in below sections may cause system to malfunction. OverClock Navigator [Normal] =========== Automate OverClock System =========== Auto OverClock System [V6-Tech Engine] Manual OverClock System CPU Frequency Setting [200] PCIE Clock By [Auto] PCIE Frequency Setting [100] CPU Voltage [Default] FSB Voltage [Default] Chipset Voltage [Default] Memory Voltage [Default] DRAM Frequency [Auto] Configure DRAM Timing by SPD [Enabled] Integrated Memory Test [Enabled] Options Disabled Enabled Select Screen Select Item EnterGo to Sub Screen F1 General Help F10 Save and Exit ESC Exit vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc. Step 2 Save and Exit from CMOS setup and reboot the system to activate this test. Run this test for 5 minutes (minimum) to ensure the memory stability. Step 3 When the process is done, change the setting back from "Enable" to "Disable" to complete the test. 23