Bissell Lift-Off® Multi Cyclonic Pet Vacuum User Guide - English - Page 10

Maintenance and care To maintain maximum cleaning performance, the following maintenance steps must be performed: 1. Empty the dirt container when the dirt reaches the "Full" line. 2. Check the pre-motor filter at least once a month and clean and replace as needed. 3. Check and replace the post-motor filter as needed. NOTE: More frequent filter cleaning may be necessary if you are vacuuming new carpet, fine dust or have allergy concerns. Follow the instructions on the following pages to perform these simple maintenance steps. WARNING: To reduce the risk of electric shock, turn power switch OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks. Empty Dirt Container The dirt container needs to be emptied when the dirt reaches the "Full" line on 2. the front of the container. 1. Unplug cleaner from electrical outlet. Full Line 2. Slide the Lock 'n Seal lever to the "Unlock" position. 3. Grasp handle and pull the dirt container straight out to remove from vacuum. Unlock Position Lock Position 4. Empty dirt into garbage container. 3. 5. Put the dirt container back in the vacuum and slide the lever to the "Lock" position. The dirt container may be washed in warm water with a mild detergent. Make sure it is completely dry before replacing. NOTE: Emptying the dirt container after every use will help prevent over filling and ensure that the vacuum is ready to go the next time you clean. 10 www.bissell.com 800.237.7691