Bissell Lift-Off® Multi Cyclonic Pet Vacuum User Guide - English - Page 6

Caution, Attention - lift off multi cyclonic pet vacuum

Page 6 highlights

Operations Power switch/brush switch The power switch is located just below the handle on the front of the detachable canister. Push the rocker switch "ON" (I) to vacuum, and "OFF" (O) when cleaning is complete. The brush switch is located just below the handle on the front of the detachable canister next to the power switch. This switch turns the rotating brush on and off. The brush switch should be in the "ON" (I) position for normal carpet cleaning. It is recommended to turn the brush switch "OFF" (O) for bare floor cleaning or other delicate surfaces. Note: Your BISSELL Lift-Off Multi Cyclonic Pet vacuum is equipped with a special internal switch that turns the rotating brush off whenever the unit is in the Upright position. caution: Before using your vacuum, make sure that the dirt container is in locked position and that all filters (pre-motor and post-motor) are in place. Do not operate your vacuum without these filters. Tip: Your vacuum features a quick-release cord wrap. To remove the power cord quickly and easily, rotate the upper cord wrap towards floor, and slip power cord off from upper cord wrap. Power 1. 2. Brush Handle position 1. Upright- For storage and above floor cleaning with special tools. 2. Normal Cleaning- Press handle release pedal once. Use for most household floor cleaning tasks. Height adjustment There are seven height settings available for various floor surfaces. Turn the dial on the foot of the cleaner to the desired setting. Lowest setting - for low pile carpet or bare floors. To pick up debris it may be necessary to move up one setting. Attention: Some frieze carpets have long delicate fibers or threads that may be damaged by the rotating brush during vacuuming. It is recommended the rotating brush be turned OFF when cleaning this type of carpet. Medium settings - for medium pile carpet. High setting - for high pile and most shag/frieze carpet. Note: For optimal carpet cleaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting. If the dial is difficult to turn, tilt the cleaner back slightly to take the weight off of the foot while turning. Tip: Before cleaning under low furniture, check area first for objects that might harm the unit or block the vacuum hose. 6 www.bissell.com 800.237.7691

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

www.bissell.com
800.237.7691
O
perations
6
Power switch/brush switch
The power switch is located just below
the handle on the front of the detachable
canister. Push the rocker switch “ON” (I)
to vacuum, and “OFF” (O) when
cleaning is complete.
The brush switch is located just below
the handle on the front of the detach-
able canister next to the power switch.
This switch turns the rotating brush on
and off. The brush switch should be in
the “ON” (I) position for normal carpet
cleaning. It is recommended to turn the
brush switch “OFF” (O) for bare floor
cleaning or other delicate surfaces.
Note: Your BISSELL Lift-Off Multi
Cyclonic Pet vacuum is equipped
with a special internal switch that
turns the rotating brush off whenever
the unit is in the Upright position.
Handle position
1. Upright-
For storage and above floor
cleaning with special tools.
2. Normal Cleaning-
Press handle release
pedal once. Use for most household floor
cleaning tasks.
Height adjustment
There are seven height settings avail-
able for various floor surfaces. Turn the
dial on the foot of the cleaner to the
desired setting.
Lowest setting
– for low pile carpet or
bare floors. To pick up debris it may be
necessary to move up one setting.
Medium settings
– for medium pile
carpet.
High setting
– for high pile and most
shag/frieze carpet.
Note: For optimal carpet cleaning
performance, adjust to the lowest
practical setting. If your cleaner is
difficult to push, adjust to the next
higher setting.
If the dial is difficult to turn, tilt the
cleaner back slightly to take the
weight off of the foot while turning.
CAUTION:
Before using your vacuum, make
sure that the dirt container is in
locked position and that all filters
(pre-motor and post-motor) are
in place. Do not operate your
vacuum without these filters.
Tip:
Before cleaning under low furniture,
check area first for objects that might
harm the unit or block the vacuum hose.
Tip:
Your vacuum features a quick-release cord
wrap. To remove the power cord quickly
and easily, rotate the upper cord wrap
towards floor, and slip power cord off from
upper cord wrap.
Brush
Power
1.
2.
ATTENTION:
Some frieze carpets have long delicate
fibers or threads that may be damaged by
the rotating brush during vacuuming. It is
recommended the rotating brush be turned
OFF when cleaning this type of carpet.