Bissell Multi Reach Cordless Vacuum 2151A User Guide - Page 7
hours, boost
 |
View all Bissell Multi Reach Cordless Vacuum 2151A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Battery charging Recharge the battery when a single green light flashes. 1-4 slow blinking green lights indicates it is charging. Plug the charger in and connect it to the battery. 4 hours 1 hour boost After 4 hours the LEDs turn green and charging is complete. It is OK to charge for 1 hour for a burst of cleaning. BATTERY LIGHT STATUS Charging 1-4 slow blinking green lights indicate the battery is charging. Running While running, 1-4 green lights indicate you have 25% (1 light) to 100% (4 lights) battery left. Jammed Brushroll 4 solid red lights mean the brushroll has jammed. Remove the battery, remove the brushroll, clean it and replace. Once the battery is replaced it may take 10 sec. to turn from red to green. www.BISSELL.com 7
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12
 |
 |
www.BISSELL.com
7
Plug the charger in and connect it to
the battery.
Battery charging
After 4 hours the LEDs turn green
and charging is complete.
It is OK to charge for 1 hour for a
burst of cleaning.
Recharge the battery when a single
green light flashes. 1-4 slow blinking
green lights indicates it is charging.
4
hours
1
hour
boost
BATTERY LIGHT STATUS
Charging
1-4 slow blinking green lights indicate the battery is charging.
Running
While running, 1-4 green lights indicate you have 25% (1 light) to
100% (4 lights) battery left.
Jammed
Brushroll
4 solid red lights mean the brushroll has jammed. Remove the
battery, remove the brushroll, clean it and replace. Once the
battery is replaced it may take 10 sec. to turn from red to green.