Bissell SmartClean Robotic Vacuum 1605 User Guide - Page 14

LED Error Code (power LED flashes red) Display on screen Possible cause The wheel is stuck. The top cover or dust bin is not installed properly. The bumper is stuck. The unit was lifted up from the floor. The color of the floor is too dark The battery is not installed properly. Charging error. (Power switch is off) Solution Remove vacuum from obstacles, and restart the power switch. Install the top cover and dust bin properly. The unit will detect the error and fix automatically. If the unit does not fix automatically, turn the unit off and back on. Remove vacuum from obstacles. The unit will detect the error and fix automatically. Put vacuum back on the floor. Remove robot from the flooring. Use virtual wall to keep the robot off of the flooring. To install the battery properly, please refer to page 5 for battery installation, and turn on the power switch after installation is complete LED Display Display on screen Indication Battery Low: Battery needs to be charged. (Power LED turns Red) 14 www.BISSELL.com