Bissell SmartClean Robotic Vacuum 1605 User Guide - Page 7

Recharging the Battery: Docking Station 1 NOTE: The unit will not charge if the power switch is OFF. Make sure the docking station is installed correctly with at least 40 inches to one side, 12 inches to the opposing side and no obstructions in front of the docking station. After the initial charge is complete, plug the wall adaptor directly into the docking station. To test the auto-charge feature of the dock, turn the power switch on the vacuum on, and select "00" with the center button. The vacuum should back into the dock for recharging if the appropriate spacing was provided for the docking station. The Invisible Wall*: Assembly & Use 1 2 3 To remove the battery cover, hold the invisible wall and press firmly while sliding downward to remove the battery cover. Insert batteries with the +/- terminals facing the directions indicated and replace the battery cover. (AA batteries not included) 4 Place the invisible wall in the threshold of a room or in front of an area of the room you do not want the robot to clean. To turn on the virtual wall slide the switch away from the light towards the (I) symbol. Wait 10 seconds between turning it on or off. *Requires 4AA batteries. Batteries sold separately NOTE: Indicator light is only ON when cleaner approaches sensor path. www.BISSELL.com 7