Bissell Steam & Hard Floor User Guide - Page 11

Disposing of the Battery Go to support.BISSELL.com for resources on battery disposal. Before disposing the battery, make sure: • The machine is disconnected from the 3-in-1 Docking Station. • The Clean and Dirty Water Tanks are empty or removed from the machine. • A Phillips-head screwdriver, electrical tape and rubber handled wire cutters are available for disassembly. 1. With a Phillips-head screwdriver, remove the 4 screws on the back of the machine. Lift off the back cover. 2. Cut the yellow positive (+) battery wire with wire cutters. Wrap the end of the cut wire with electrical tape. Individually cut and wrap the remaining battery wires. 3. Using a Phillips-head screwdriver, remove the 4 screws located on the sides of the battery pack and remove it from the back cover. Troubleshooting For troubleshooting videos visit support.BISSELL.com. This guide features everything you need to get ready for first use, including setting up, using and maintaining your machine, but join us online for a comprehensive walkthrough. Our online support includes tips and troubleshooting, videos, product registration, parts and more. NOTICE Disconnecting the battery will destroy the appliance and invalidate the warranty. WARNING This product contains lithium-ion rechargeable batteries. According to Federal and State regulations, removal and proper disposal of lithium-ion batteries is required. For removal of the batteries in your appliance, see instructions on this page. For specific disposal instructions of batteries, please contact the RBRC (Rechargeable Battery Recycling Corporation) at 1-800-822-8837 or visit www.Call2Recycle.org. BISSELL.com 11