Bissell Steam & Hard Floor User Guide - Page 9
Emptying the Dirty Water Tank
View all Bissell Steam & Hard Floor manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Emptying the Dirty Water Tank Go to support.BISSELL.com for a full list of how-to videos. When the Dirty Water Tank is full, your machine will turn OFF, beep and the Dirty Water Tank Full icon will blink orange on the Digital Display. 1. To remove the Dirty Water Tank, press the button on top of the tank, grab the front handle and pull the tank out. 2. Remove the top of the Dirty Water Tank by grasping the recessed areas on each side of the filter and pulling up. 3. Separate the hair and debris from the dirty water by grasping the strainer tab and pulling up. Throw the debris into the trash. 4. Pour the dirty water into the 5. Remove the filter from the sink and rinse the Dirty Water top of the Dirty Water Tank by Tank. pulling it up. 6. Hand wash the filter and screen with warm water and mild detergent. Rinse the bottom of the Dirty Water Tank cover. 7. Leave the parts out to dry before reassembling. 8. Once all parts are dry, reassemble the filter and the Dirty Water Tank cover. 9. Angle the Dirty Water tank back into the body of the machine. Insert the bottom of the tank first, then pivot the top toward the machine until it "clicks" into place. WARNING To reduce the risk of electrical shock, turn Power Button OFF before performing maintenance or troubleshooting checks. BISSELL.com 9