Bissell Steam Mop™ Max User Guide - Page 6

Operations Special Features Removable water tank The water tank is located on the back of the Steam Mop Max. It can be refilled with water any time during use. Distilled or demineralized water is recommended in place of tap water. Do not use chemicals with your Steam Mop Max. Water purification system This filter removes minerals and other impurities from tap water, preventing water deposits from damaging your Steam Mop Max. It should be replaced when the bright green grains turn blue. To maximize performance of the filter, distilled water should be used. Ready light The ready light will glow when water has been converted to steam and the Steam Mop Max is ready to use. Steam on demand trigger Press to release steam. Maneuverable swivel head Allows you to pick up dust and small debris while steam cleaning your floor. The maneuverable swivel head gets into tight spaces and under cabinets. Deluxe mop pads Reusable microfiber mop pad is machine washable and safe for all hard floor surfaces. Tip: To prevent damage to the machine, do not attempt to use your Steam Mop Max without water in the tank. Getting ready The mop pad may have already come 1A. 1B. attached to the swivel head. follow steps 1A and 1B below. 1. Attach mop pad. A. Set swivel head in mop pad, making sure toggle is located on the back. B. Tighten mop pad by pulling on elastic cord while pressing on toggle 2A. 2. Fill the water tank. A. Remove the tank by lifting straight up and away from the unit. 6