Bosch 11250VSRD Operating Instructions - Page 10

BM 1619P02168 12-07 12/5/07 3:52 PM Page 10 been released. (When drilling, the telescopic guide will compress until it engages the depth stop button.) ADJUSTING THE TELESCOPIC GUIDE TO THE BIT LENGTH For more convenient operation when using short drill bits, the length of the telescopic guide can be adjusted to desired lengths. To adjust length, push and hold the guide adjustment button, compress the telescopic guide until dust cap is close to the tip of the drill bit (Fig. 10). To lock adjustment, release button. To unlock adjustment, push the guide adjustment button. FIG. 9 DUST CAP DUST SEAL FIG. 10 GUIDE X HOUSING DEPTH STOP BUTTON TELESCOPIC GUIDE DUST CAP FOR SMALL DRILL BITS Your tool is equipped with a standard dust cap for use with with small drill bits. To change the dust cap, push the release button and pull the dust cap out of the dust extraction system. To insert the dust cap, push it into the end of the dust extraction system until you hear it lock into place (Fig. 11). FIG. 11 GUIDE ADJUSTMENT BUTTON DUST CAP FOR SMALL BITS DUST CAP RELEASE BUTTON DUST CAP FOR CORE BITS 1-1/2" MAXIMUM CAPACITY (Not included, available as accessory) When using core bits, the dust cap for small drill bits must be removed and replaced with a special dust cap for core bits (optional accessory). When using the dust cap for core bits (optional accessory), the vacuum adapter dust canister -10-