Bosch DVR4C1081 Installation Manual - Page 18
Installation Manual | Menu system
View all Bosch DVR4C1081 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
DVR4C | Installation Manual | Menu system >> MONITOR SETUP >> SECURITY EN | 18 >>> DISPLAY CAMERA WITH MOTION • Select if the DVR switches automatically to a full screen image of the camera when motion is detected on that camera. • With multiple motion detections shortly after each other, the last camera where motion was detected is used for display. >>> DISPLAY CAMERA WITH INPUT ALARM • Select if the DVR switches automatically to a full screen image of the camera when an input alarm becomes active for that camera. • In case of multiple input alarms shortly after each other, the last input alarm is used for display. >>> DISPLAY DWELL TIME • Specify the dwell time for displaying the camera with an input alarm or motion. The interval can be configured with a slider from 5 to 10 seconds. • If Follows is selected, the camera of the channel in alarm or with motion is shown for as long as the alarm is present or motion is detected. >>> SEQUENCE DWELL TIME • Specify the sequence dwell time that is used when the SEQ key is pressed. • The interval can be configured with a slider from Off (disable) to 60 seconds (default 10 seconds). >>> EXIT PLAYBACK ON EVENT • When set to On, the DVR exits playback to display a live event. >>> LOCAL PASSWORDS • Set a local user password to allow a user limited access rights only for monitoring, monitoring control (Auto Seq., digital zoom), copy and playback control. Configuration is not allowed. • A password consists of 4 digits (0-9), entered by using the up and down keys. • To confirm the input, the user has to enter the same password again. • The configured password is only valid for local users. The password is shown in the menu using * characters. • If a password is set, a user without the correct password can only view live video and switch between full screen or quad views. • Set a local administrator password. An administrator is allowed to enter all menus and configure all settings. • A password consists of 4 digits (0-9), entered by using the up and down keys. • To confirm the input, the administrator has to enter the same password again. • The configured password is only valid for the local administrator. The password is shown in the menu using * characters. • To lock the keys on the front of the DVR, set keylock to On and enter a four-digit password. (To unlock all the keys on the front panel, use Keys 1 to 4 to enter the password.) Bosch Security Systems | Version 1.1