Bosch REG-D1-875XE-01 Installation Instructions - Page 9
Initial Preparations, Guidelines
View all Bosch REG-D1-875XE-01 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
INITIAL PREPARATIONS • Determine the operating voltage at the installation site. The camera's Voltage Regulator Board accepts both 12-24VDC/VAC input without change to internal connections. See Section 2, Input Power Connections. • Determine the optimum location for the camera. See Section 3, Mounting Specification. • All cameras have been tested prior to shipment. After the wiring has been reconnected, it is advisable to check the camera's operation before installation. GUIDELINES The installation of the REG-D1 camera is explained in Sections 1 to 3. It is important that these steps are followed and to practice proper installation procedures with proper safety equipment. - 3 -
- 3 -
INITIAL PREPARATIONS
•
Determine the operating voltage at the
installation site. The camera‘s Voltage Regulator
Board accepts both 12-24VDC/VAC input
without change to internal connections.
See
Section 2, Input Power Connections
.
•
Determine the optimum location for the camera.
See
Section 3, Mounting Specification.
•
All cameras have been tested prior to shipment.
After the wiring has been reconnected, it is
advisable to check the camera’s operation
before installation.
GUIDELINES
The installation of the
REG-D1
camera is explained in
Sections 1 to 3.
It is important that these steps are followed and to
practice proper installation procedures with proper safety
equipment.