Bosch SHX78CM2N Use and Care Manuals 2 - Page 28
Cleaning filters, Setting the amount of rinse aid,
View all Bosch SHX78CM2N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
en-us Troubleshooting Issue E:92-10 lights up alternately. Cause and troubleshooting Spray arm rotation of the lower spray arm is blocked. ▶ Arrange the dishware so that it does not obstruct spray arm rotation of the lower spray arm. Lower spray arm is not correctly fitted. ▶ Fit the lower spray arm correctly. E:92-40 lights up alternately. A different error code appears in the display window. E:01-00 to E:90-10 Dishware is not dry. Filters are soiled or blocked. ▶ Clean the filters. → "Cleaning filters", Page 24 There is a technical issue. 1. Press . 2. Pull out the power cord plug of the appliance or switch off the breaker. 3. Wait at least 2 minutes. 4. Insert the power cord plug of the appliance in a power outlet or switch on the breaker. 5. Switch the appliance on. 6. If the problem occurs again: ‒ Press . ‒ Turn off the water faucet. ‒ Pull out the power cord plug. ‒ Contact customer service → Page 35 and give the error code. No rinse aid used or dosage set too low. 1. Add Rinse aid → Page 15. 2. Set the amount of rinse aid to be dispensed. → "Setting the amount of rinse aid", Page 15 Cycle or cycle option has no drying phase, or drying phase is too short. ▶ Select a wash cycle with drying. → Page 10 Some option buttons decrease the drying result. Water collects in recesses of dishware or silverware. 28