Bosch SHX78CM2N Use and Care Manuals 2 - Page 31

Troubleshooting en-us Issue Tea residue or lipstick marks on dishware. Cause and troubleshooting ▶ Only remove large remnants of food and do not pre-rinse dishware. ▶ Adjust the sensitivity of the sensors. → "Sensors", Page 6 There are colored coatings (blue, The formation of films is due to substances contained in vegetables (cabbage, yellow, brown) inside the appliance celery, potatoes, noodles, etc.) or tap water (manganese). or on stainless steel dishware that ▶ Clean the appliance. are difficult or impossible to remove. You can remove coatings with Mechanical cleaning → Page 23 or a machine cleaning product. It may not always be possible to completely remove coatings but they are harmless to health. The formation of films is due to metal components on silver or aluminum dishware. ▶ Clean the appliance. You can remove coatings with Mechanical cleaning → Page 23 or a machine cleaning product. It may not always be possible to completely remove coatings but they are harmless to health. Plastic parts inside the appliance are discolored. Plastic parts inside the appliance may become discolored over the life of the dishwasher. ▶ Discoloration may come about and will not impair functioning of the appliance. Plastic parts are discolored. Dishwashing temperature is too low. ▶ Select a program with a higher dishwashing temperature. Dishware has been precleaned too intensively. Then the sensors choose a lighter cycle. Stubborn remnants cannot be entirely removed. ▶ Only remove large remnants of food and do not pre-rinse dishware. ▶ Adjust the sensitivity of the sensors. → "Sensors", Page 6 There are removable streaks on Amount of rinse aid to be dispensed is set too high. glasses, glassware with a metallic ▶ Set the rinse aid system to a lower setting. appearance and silverware. → "Setting the amount of rinse aid", Page 15 No rinse aid has been added. ▶ Add rinse aid. → "Adding rinse aid", Page 15 There is detergent residue in the final rinse. Lid of detergent dispenser is blocked by dishware and will not open fully. 1. Arrange dishware in the upper rack so the tab collecting tray is not obstructed by dishware. → "Loading dishware", Page 18 Items of dishware are blocking the dispenser lid. 2. Do not place dishware or fragrance dispensers in the tab collecting tray. Dishware has been precleaned too intensively. Then the sensors choose a lighter cycle. Stubborn remnants cannot be entirely removed. ▶ Only remove large remnants of food and do not pre-rinse dishware. ▶ Adjust the sensitivity of the sensors. → "Sensors", Page 6 Irreversible clouding of glassware. Glasses are not dishwasher-proof, only suitable for dishwashers. ▶ Use dishwasher-proof glasses. Glasses are usually only suitable for cleaning in a dishwasher, i.e. long-term wear or long-term changes must be expected. ▶ Avoid a lengthy steam phase (standing time after wash cycle ends). ▶ Use a program with a lower temperature. ▶ Use detergent with a glass protection component. 31