Bosch SPE53B52UC Installation Instructions - Page 13

Attaching the Toe Panel Your dishwasher comes with either a two-piece or threepiece toe panel (model dependent) to allow height adjustment. 1. Position the slotted rear toe panel (part of E) on the dishwasher first. Allow it to rest on the floor. 2. Position the mating front toe panel (part of E) on top of the rear toe panel allowing the angled edge to rest on the mating edge of the dishwasher. 3. Drive the two black screws (B) through the holes in the toe panel to secure. Use the supplied screws to avoid damaging the dishwasher. See Figure 21 4. For models with outer toe panel (3rd piece - L) slide the brackets (K) provided, into the slots of the toe panel you just attached. 6. Once you determine the correct position for the brackets, remove the bracket and bend the metal tab. See Figure 22. This ensures that the toe panel will not slide in further than you need. 7. Re-insert the brackets. 8. Attach the outer toe panel (L) onto the brackets and drive the screws provided (F) in place to secure the toe panel. Figure 21 B E B K L K F Figure 22 1133