Bosch SPE68B55UC Use and Care Manual 1 - Page 20
Before using for the, first time, Rinse aid system
View all Bosch SPE68B55UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
en-us Before using for the first time Before using for the first time 8 Before using for the first time Before using for the first time Apply the settings for the first use. 8.1 Initial use Before the first use, or after a factory reset, you will need to configure the settings. Tip: Connect your appliance to a mobile device. You can conveniently change all settings using the Home Connect™ app. → "Home Connect™ quick start", Page 31 Requirement: The appliance has been installed and connected. 1. Add rinse aid. → Page 20 2. Switch on the appliance. → Page 27 3. Set the amount of rinse aid. → Page 20 Tip: You can change these settings and other Basic settings → Page 29 at any time. Rinse aid system 9 Rinse aid system Rinse aid system You can use the rinse aid system and rinse aid to get dishware and glasses rinsed perfectly without spots. 9.1 Rinse aid For optimum drying results, use rinse aid. Only use rinse aid intended for household dishwashers. Adding rinse aid If the rinse aid refill indicator lights up, fill the dispenser with rinse aid. Only use rinse aid intended for household dishwashers. 20 1. Press the catch on the lid of the dispenser for rinse aid and lift . 2 1 2. Add rinse aid up to the max mark. max 3. If rinse aid spills out, remove it from the tub. Spilled rinse aid can cause excessive frothing during the wash cycle. 4. Close the lid of the dispenser for rinse aid. a The lid clicks into position. 9.2 Setting the amount of rinse aid If there are streaks or water spots on dishware, change the amount of rinse aid. 1. Press . 2. To open the basic settings, press for 3 seconds. a The display shows . 3. Press repeatedly un- til the display shows the value set at the factory 2.