Bosch SPE68B55UC Use and Care Manual 1 - Page 40
Cleaning filters, Filter system,
View all Bosch SPE68B55UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
en-us Troubleshooting Issue Dishware is not dry. Cause and troubleshooting Dishware removed too early or drying process not yet ended. 1. Wait until the program ends. 2. Only remove dishware 30 minutes after the program has ended. Rinse aid used has a limited drying performance. ▶ Use a name-brand rinse aid. Eco products may have limited effectiveness. Silverware is not dry. Silverware not arranged properly in the silverware basket or silverware drawer. Droplets can form on the contact points of silverware. 1. Arrange silverware individually where possible. → Page 24 2. Avoid points of contact. Appliance interior still wet after wash cycle. Food remnants on dishware. Not an error. Condensation drying creates water droplets in the tub. This is normal. Moisture in the air condenses on the inside walls of the appliance, runs off, and is pumped out. No action required. Dishware was placed too close together or rack is overfilled. 1. Arrange dishware with sufficient space in be- tween. The spray jets must reach the surfaces of the dishware. 2. Avoid points of contact. Spray arm rotation is blocked. ▶ Arrange dishware so it does not obstruct spray arm rotation. Spray arm nozzles are blocked. ▶ Clean the Spray arms → Page 36. Filters are dirty. ▶ Clean the filters. → "Cleaning filters", Page 35 Filters are inserted incorrectly and/or not engaged. 1. Insert the filters properly. → "Filter system", Page 35 2. Twist filters into place. Selected wash cycle is too light. ▶ Select a more intensive cycle. 40