Bosch SPE68B55UC Use and Care Manual 1 - Page 41
Loading dishware, Rinse aid,
View all Bosch SPE68B55UC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Troubleshooting en-us Issue Cause and troubleshooting Food remnants on dishware. Dishware has been precleaned too intensively. Then the sensors choose a lighter cycle. Stubborn remnants cannot be entirely removed. ▶ Only remove large remnants of food and do not pre-rinse dishware. Tall narrow containers in corner areas are not rinsed out adequately. ▶ Do not position tall narrow containers at too great an angle or in corner areas. Upper rack on right and left not set to same height. ▶ Set the upper rack on the right and left to the same height. Detergent residue in Lid of the detergent dispenser is blocked by items the appliance of dishware and will not open. 1. Arrange dishware in the upper rack so the tab collecting tray is not obstructed by dishware. → "Loading dishware", Page 24 Items of dishware are blocking the dispenser lid. 2. Do not place dishware or fragrance dispensers in the tab collecting tray. The lid of the detergent dispenser is blocked by the tab and will not open. ▶ Position the tab in the detergent dispenser crosswise, not vertically. Tabs are used in the quick or short cycle. There is not enough time for the tab to dissolve. ▶ Select a more intensive Wash cycle or use Powder detergent. Detergent may lose its cleaning or dissolving ability after being stored a long time, or the detergent is clumped together. ▶ Change your Detergent. Water spots on plastic parts. Droplet formation on plastic surfaces is unavoidable due to the laws of physics. Water spots are visible after drying. ▶ Select a more intensive program. ▶ Position dishware at an angle. → "Loading dishware", Page 24 ▶ Use rinse aid. → "Rinse aid", Page 20 41