Bose 701 Series II Speaker Owner's guide - Page 7

Making the connections (cont.) Figure 5 Wiring schematic Setting Up L L R R er Output Input LFE/ Subwoofer Figure 6 Connecting the right accessory speaker to the left main speaker L L R 125/115C 225W Power Output R Input LFE/ Subwoofer Receiver Left main speaker Press down the terminal tab on the bottom of the left main speaker to insert the appropriate wire (Figure 5). 1. Connect one cord to the left speaker output of your receiver or amplifier. A. Insert the marked wire at one end to the red (+) terminal. B. Insert the plain wire at that end to the black (-) terminal. 2. Connect the other end of the cord to the left (L) main speaker terminals (Figure 5). A. Insert the marked wire into the red (+) terminal. B. Insert the plain wire into the black (-) terminal. 3. Repeat steps 1 and 2 for the right (R) speaker connections. Note: The right speaker outputs are located on the left main speaker directly below the left speaker outputs. They are labeled with an R. Connecting the right accessory speaker to the left main speaker Use the supplied Bose® interconnect cable to make this connection. It is important to note the connector at each end is designed to be inserted in one orientation only. Match the curved top of the connector to the curved top of the jack on the rear connector cups. CAUTION: Never connect the right accessory speaker directly to a receiver output. Always connect the right accessory speaker to the left main speaker, then connect the left main speaker to the receiver. Input Power Output Inpu Right accessory speaker 125/115C 225W Power Output L R Input LFE/ Subwoofer Left main speaker 7