Bose A20 Aviation 2010-2015 Owner's guide - Page 13
Connecting the headset to the aircraft
View all Bose A20 Aviation 2010-2015 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Preparing the Headset for Use Connecting the headset to the aircraft The Bose® A20® Aviation Headset can be configured to either plug into aircraft power or rely entirely on battery power. Using the 6-pin plug A single 6-pin plug inserted into the 6-pin connector provides the headset with aircraft power and intercom audio. If your headset is aircraft-powered, a 6-pin connector must be installed and mounted to an aircraft panel. See "Mounting the aircraft panel connector" on page 33. Note: An adapter is available from Bose to convert a 6-pin connector to a dual G/A or U174 plug for additional connection flexibility. To connect the headset Align the 6-pin plug to the connector keyway by matching the narrow bar on the plug to the slot on the connector. Firmly press the plug into the connector jack. Align keyway Push plug in To disconnect the headset 1. Pull back on the sleeve near the end of the 6-pin plug. 2. Gently continue pulling back to remove the plug from the connector. CAUTION: Do not pull the connector out without first pulling back the sleeve. Forcing the connector out will damage the cable and/or the aircraft instrument panel. Pull sleeve back, then pull plug out Sleeve English - 13